2015 Nissan Versa Owner's Manual - Page 55

2nd row bench seat Outboard seating positions 1. Remove the head restraint/headrest and store it in a secure place. Be sure to reinstall the head restraint/headrest when the child restraint is removed. For additional information, refer to "Head restraints/ headrests" in this section for head restraint/headrest adjustment, removal and installation information. 1 over the 2. Position the top tether strap᭺ seatback. WRS0475 LRS2455 Forward-facing - step 10 10. If the child restraint is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag should illuminate. If this status light light is not illuminated, see ЉFront passenger air bag and status lightЉ in this section. Move the child restraint to another seating position. Have the system checked by a NISSAN dealer. After the child restraint is removed and the seat belt is fully retracted, the ALR mode (child restraint mode) is canceled. 2nd row bench seat 1. Top tether strap 2. Anchor point 3. Secure the tether strap to the tether anchor 2 on the bottom of the seatback bepoint᭺ hind the child restraint. 4. Tighten the tether strap according to the manufacturer's instructions to remove any slack. INSTALLING TOP TETHER STRAP The child restraint top tether strap must be used when installing the child restraint with the seatbelts. First, secure the child restraint with the seatbelts. Center seating position 1. Remove the head restraint/headrest and store it in a secure place. Be sure to reinstall the head restraint/headrest when the child restraint is removed. For additional information, refer to "Head restraints/ headrests" in this section for head restraint/headrest adjustment, removal and installation information. 1-38 Safety-Seats, seat belts and supplemental restraint system