2015 Nissan Versa Owner's Manual - Page 86

When the fuel level drops even lower, the distance to empty will display (----). SERVICE INTERVAL REMINDER When the ignition switch is placed in the ON position, a wrench symbol and the distance to oil change information will illuminate on the display for approximately 5 seconds. The wrench symbol and distance to oil change switch to oil display status. Then the oil display status switches to odometer and twin trip odometer/trip computer information mode that was displayed before the ignition switch was placed in the ACC, OFF or LOCK position. The oil level display status provides specific information regarding your approximate engine oil level. In case of low engine oil level, see "Engine oil" in the "Maintenance and do-it-yourself" section for the proper engine oil refilling procedure. can be set up to 18,000 mi (30,000 km) after which the display returns to zero. If no further action is made, the display returns to oil display status indication and the new interval is set. If the interval distance is set to 0, the display will skip the distance to oil change information and wrench symbol display mode. In order to return to the distance to oil change information and wrench symbol display mode, push the trip comA on the instrument panel puter change button ᭺ B for approxilocated near the speedometer ᭺ mately 3 seconds after the ignition switch has been turned to the ON position, and adjust the distance to oil change schedule as previously described. See the Warranty Information & Maintenance Booklet for the appropriate interval distance to oil change. Trip computer reset Type A: Pushing the change button for more than 3 seconds will reset all modes except Trip A and distance to empty (dte). on the Type B: Pushing the menu button steering wheel for more than 3 seconds will reset average fuel economy, average speed and travel time. Average speed The average speed mode shows the average vehicle speed since the last reset. Resetting is done by pushing the menu button on the steering wheel for longer than 1 second. Travel time The travel time mode (elapsed time) shows the time since the last reset. The displayed time can be reset by pushing the menu button on the steering wheel for longer than 1 second. Oil change schedule set up It is possible to adjust the interval distance to oil change by pushing the trip computer change A on the instrument panel located near button ᭺ B for 3 seconds while the the speedometer ᭺ wrench symbol and distance to oil change are displayed. The symbol and distance display will start flashing and the display shows the current interval. Push the switch to increase the interval distance. Each step increases the interval distance by 500 mi (1,000 km). The interval distance CAUTION ● The oil level should be checked regularly. Operating with insufficient amount of oil level can damage the engine and such damage is not covered by the warranty. ● NISSAN recommends checking the oil level every 3,000 mi (5,000 km). Instruments and controls 2-11