2000 Oldsmobile Silhouette Owner's Manual - Page 122

To change the mode: 1. Follow the instructions for "Entering Programming Mode" listed previously. 2. Press UNLOCK on the remote lock control transmitter. 3. Count the number of chimes you hear. The number of chimes tells you which mode your vehicle is in. You can change the mode by pressing UNLOCK again. 4. Repeat Step 2 until you hear the number of chimes that matches the mode you want. The mode you selected is now set. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle. D When you use the remote lock control transmitter to unlock your vehicle or operate your power sliding door (if equipped), your parking lamps will flash briefly. To customize these features to your preference, see "Programmable Modes" following. Programmable Modes Your vehicle can be programmed to one of the following modes. Mode 1: Both Features Off (Remote lock and unlock confirmation are disabled.) Mode 2: Exterior Lamps Flash Only D When you use the remote lock control transmitter to lock your vehicle, your parking lamps will flash briefly to let you know the command has been received. Remote Lock and Unlock Confirmation With the remote lock and unlock confirmation feature, your vehicle can do the following: D When you use the remote lock control transmitter to lock your vehicle, your parking lamps will flash briefly to let you know the command has been received. If you press LOCK on the remote lock control transmitter again, the horn will sound briefly and the parking lamps will flash briefly to let you know your vehicle is locked, and D When you use the remote lock control transmitter to unlock your vehicle or operate your power sliding door (if equipped), your parking lamps will flash briefly to let you know the command has been received. 2-18