2006 Saab 9-3 Owner's Manual - Page 276

276 Car care Safety belts WARNING If the car is involved in a crash, the safety belts, belt pretensioners and other associated components must be inspected. We recommend that you contact a Saab dealer. Never make any alterations or repairs to the safety belts yourself. We recommend that you contact a Saab dealer dealer. Upholstery and trim To remove fluff and hairs from the seats, door armrests and headlining, use a vacuum cleaner, a moist lint-free cloth, or a clothes brush. Remove spots and dirt using a cloth moistened with lukewarm soapy water. When using a stain remover, always work from the outside towards the centre to avoid leaving a ring. If a soiled ring or spot should remain, it can usually be removed using lukewarm soapy water or water alone. Spots left by liquids, such as soft drinks or thin oil, must be removed at once with an absorbent material, such as kitchen towelling. Then clean with a stain remover. White spirit is recommended for removing grease and oil stains. A medium stiff brush may also be used. Grease the surfaces indicated with a thin layer of grease Check the function of the safety belts regularly as follows: • Hold the diagonal strap and pull it sharply. The safety belt should lock and it should not be possible to withdraw it further. Check the anchorage points in the floor. They must not have suffered rust damage. If a belt is worn or has any fraying edges, it should be replaced. Safety belts must not come into contact with substances such as polishes, oil or chemicals. If the belts get dirty, wash them with warm water and a detergent or have them replaced. Tightening sequence, wheel bolts