2002 Subaru Outback Owner's Manual - Page 100

Keys and doors To enter the programming mode: 1 Press to disarm the security system (if so equipped). 2 3 HB1000CB HB1005BC 1. Disarm the security system. (if your vehicle is equipped with the optional security system.) 2. Open the driver's door and sit in the driver's seat. 3. Close the driver's door. HB2032BB 4. Place the ignition key into the ignition switch and cycle the switch from LOCK to ON ten times within 15 seconds. Be sure to stop at the LOCK position. The horn will sound once to indicate that you are in the transmitter programming mode. NOTE You must finish the next step (opening the driver's door) within 45 seconds of starting this procedures. - CONTINUED - 2-11