3Com 3C16755-US User Guide - Page 14
Ethernet 10Mbps Configuration Rules
 |
UPC - 662705420721
View all 3Com 3C16755-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
3Com recommends that the cable (B) between the Fast Ethernet hubs is no longer than 5m (16.4ft). This allows the maximum hub-to-workstation cable length (A or C) of 100m (328ft). Figure 3 Configuration Rules and Example of a Fast Ethernet (100Mbps) Network Ethernet (10Mbps) Configuration Rules You can connect a maximum of four Ethernet (10Mbps) hubs in series between workstations, or between a workstation and a non-repeater piece of equipment (such as a switch). Each cable must not exceed 100m (328ft). An example is shown in Figure 4. Figure 4 Example of an Ethernet (10Mbps) Network 14
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
14
3Com recommends that the cable (B) between the Fast
Ethernet hubs is no longer than 5m (16.4ft). This allows the
maximum hub-to-workstation cable length (A or C) of 100m
(328ft).
Figure 3
Configuration Rules and Example of a Fast Ethernet
(100Mbps) Network
Ethernet (10Mbps) Configuration Rules
You can connect a maximum of four Ethernet (10Mbps)
hubs in series between workstations, or between a
workstation and a non-repeater piece of equipment (such as
a switch). Each cable must not exceed 100m (328ft). An
example is shown in Figure 4.
Figure 4
Example of an Ethernet (10Mbps) Network