3Com 3c17300 Implementation Guide - Page 21
Smart Auto-sensing, Smart auto-sensing will not operate on links that do not support
View all 3Com 3c17300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Port Features 23 Smart Auto-sensing Smart auto-sensing allows auto-negotiating multi-speed ports, such as 10/100 Mbps or 10/100/1000 Mbps, to monitor and detect a high error rate on a link, or a problem in the "physical" interconnection to another port and react accordingly. In other words, auto-negotiation may "agree" upon a configuration that the cable cannot sustain; smart auto-sensing can detect this and adjust the link accordingly. For example, smart auto-sensing can detect network problems, such as an unacceptably high error rate or a poor quality cable. If both ends of the link support 100/1000 Mbps auto-negotiation, then auto-sensing tunes the link to 100 Mbps to provide an error-free 100 Mbps connection to the network. An SNMP Trap is sent every time a port is down-rated to a lower speed. Conditions that affect smart auto-sensing: ■ Smart auto-sensing will not operate on links that do not support auto-negotiation, or on links where one end is at a fixed speed. The link will reset to the higher speed of operation when the link is lost or the unit is power cycled. ■ Smart auto-sensing can only be configured for the whole Switch and not on a per port basis. GBIC ports do not support smart auto-sensing.