AIWA CX-NMT50 Operating Instructions - Page 12

BASIC OPERATIONS Deck 2 q On deck 1, tapes are always played back on both sides. On deck 2, you can select a reverse mode to play back one or both sides. q Use Type I (normal), Type 11(high/CrOz) or Type IV (metal) tapes for playback. 7 Press the TAPE button and press the 4 EJECT mark to open the cassette holder. When tapes are loaded in both decks Press the TAPE button first to select a deck. The selected deck number is displayed. To stop play, press the s button. To pause play (deck 2 only), press the 11 button. To resume play, press again. To change the playback side, press the 4 ® DIRECTION/ PRESET button in play or pause mode. To fast forward or rewind, press the + or - button. Then press the Z button to stop the tape. To start play when the power is off (Direct Play Function) Press the TAPE button. The power k turned on and play of the inserted tape begins. To set the tape counter to 0000 Press the N CLEAR button in stop mode. The counter is also set to 0000 when the cassette holder is opened. If a television is used near this unit during tape playback, noise may be heard from the speakers. In this case, turn the television off. 4 EJECT- U 1 Insert a tape with the exposed side down. Push the cassette holder to close. 2 Press the + E button to start play. Playing deck number The tape counter indicates the tape running length. Playback side indicator -: The front side is being played (forward). +: The back side is being played (reverse) To select a reverse mode (deck 2 only) Each time the REV MODE button is pressed, the reverse mode changes. Z+I)+C=)J To play one side only, select =. To play from front side to reverse side once only, select 1). To play both sides repeatedly, select C). q When tapes are loaded in both decks, =) on the display indicates Continuous Play. I 1 ENGLISH