ASRock 775XFire-RAID Quick Installation Guide - Page 17
DVI connector
View all ASRock 775XFire-RAID manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
ss Slot reTM Edition eTM Edition 1, Pin2 Step 3. Install the standard Radeon (CrossFireTM Ready) graphics card to AGI Express slot (PCI Express x 4). For the proper installation procedures, please refer to section "Expansion Slots". Standard Radeon (CrossFireTM Ready) graphics card Step 4. Install the Radeon CrossFireTM Edition graphics card to PCI Express x 16 slot. For the proper installation procedures, please refer to section "Expansion Slots". Radeon CrossFireTM Edition graphics card Standard Radeon (CrossFireTM Ready) graphics card You are allowed to install two CrossFireTM Edition graphics cards to both slots, or you may use one CrossFireTM Edition graphics cards and a compatible standard Radeon (CrossFireTM Ready) graphics card from the same series. Step 5. Correctly connect the DVI-DMS cable to the monitor connector and two graphics cards that you install. (If you install two standard Radeon (CrossFireTM Ready) graphics cards to this motherboard, please skip this step.) DVI-DMS cable DMS connector DVI connector Standard Radeon (CrossFireTM Ready) graphics card DVI connector Connect the DVI-DMS cable to DVI connector of the compatible standard Radeon (CrossFireTM Ready) graphics card. There are two DVI connectors on the standard Radeon (CrossFireTM Ready) graphics card. Please connect the DVI-DMS cable to the correct DVI connector; otherwise , the graphics card will not work. 17 ASRock 775XFire-RAID Motherboard English