ASRock 980DE3/U3S3 User Manual - Page 36
Power Down Enable, Bank Interleaving, Channel Interleaving, CAS Latency CL, HT Bus Width, Memory
View all ASRock 980DE3/U3S3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
HT Bus Width This feature allows you selecting Hyper-Transport bus width. The default value is [Auto]. Memory Configuration Memory Clock This item can be set by the code using [Auto]. You can set one of the standard values as listed: [400MHz DDR3_800], [533MHz DDR3_1066], [667MHz DDR3_1333] and [800MHz DDR3_1600]. DRAM Frequency If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assigns appropriate frequency automatically. Memory Timing BIOS SETUP UTILITY OC Tweaker Memory Timing Power Down Enable Bank Interleaving Channel Interleaving CAS Latency (CL) TRCD TRP TRAS Command Rate TRC TWR TRFC TRRD TWTR TRTP TFAW TCWL [Disabled] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Power Down Enable Use this item to enable or disable DDR power down mode. Bank Interleaving Interleaving allows memory accesses to be spread out over banks on the same node, or accross nodes, decreasing access contention. Channel Interleaving It allows you to enable Channel Memory Interleaving. Configuration options: [Disabled], [Auto]. The default value is [Auto]. CAS Latency (CL) Use this item to change CAS Latency (CL) Auto/Manual setting. The default is [Auto]. TRCD Use this item to change TRCD Auto/Manual setting. The default is [Auto]. TRP Use this item to change TRP Auto/Manual setting. The default is [Auto]. 36