ASRock 980DE3/U3S3 User Manual - Page 43

3.4.4 Storage Configuration BIOS SETUP UTILITY Advanced Storage Configuration Onboard SATA Controller SATA Operation Mode SATA IDE Combined Mode Onboard SATA3 Operation Mode [Enabled] [AHCI] [Enabled] [AHCI] IDE1 Master IDE1 Slave SATAII_1 SATAII_2 SATAII_3 SATAII_4 SATAII_5 SATAII_6 [Hard Disk] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] Configure onboard serial ATA controller. +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Onboard SATA Controller This item is for SATA2 ports. Use this item to enable or disable the "Onboard SATA Controller" feature. SATA Operation Mode This item is for SATA2 ports. Use this item to adjust Onboard SATA Operation Mode. The default value of this option is [AHCI]. Configuration options: [AHCI], [IDE] and [RAID]. If you set this item to RAID mode, it is suggested to install SATA ODD driver on SATAII_5 (PORT 4) and SATAII_6 (PORT 5) ports. SATA IDE Combined Mode This item is for SATAII_5 (PORT 4) and SATAII_6 (PORT 5) ports. Use this item to enable or disable SATA IDE combined mode. The default value is [Enabled]. If you want to build RAID on SATAII_5 (PORT 4) and SATAII_6 (PORT 5 ports, please disable this item. Onboard SATA3 Operation Mode This item is for SATA3 ports. Use this item to adjust Onboard SATA3 Operation Mode. The default value of this option is [AHCI]. Configuration options: [IDE], [AHCI] and [Disabled]. 43