ASRock N68C-GS FX RAID Installation Guide - Page 10

After assigning your RAID array disks, press to save your changes of RAID array disks. Depending on the platform used, the system can have one or more channels. In a typical system there is usually one adapter and multiple channels, and each channel has a slave and a master. The adapter / channel / master / slave status of each hard disk is given in the Loc (location) columns of the Free Disks and Array Disks lists. For example: 1 . 0 . M 1: Channel - Typically, channel 0 is used for Parallel ATA drives while channel 1 is used for Serial ATA drives. 0: Controller M: M means Master, S means Slave Serial ATA 1 . 0 . M Channel 1, controller 0, Master 1 . 1 . M Channel 1, controller 1, Master Finally, the Array List window appears, where you can review the RAID arrays that you have set up. Healthy NVIDIA STRIPING 74.53G 10