ASRock X58 Extreme6 User Manual - Page 17

Orient the CPU with IHS Integrated Heat

Get ASRock X58 Extreme6 PDF manuals and user guides View all ASRock X58 Extreme6 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

black line black line Step 3. Insert the 1366-Pin CPU: Step 3-1. Hold the CPU by the edges where are marked with black lines. Step 3-2. Orient the CPU with IHS (Integrated Heat Sink) up. Locate Pin1 and the two orientation key notches. orientation key notch Pin1 Pin1 alignment key orientation key notch 1366-Pin CPU alignment key 1366-Pin Socket For proper inserting, please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket. Step 3-3. Carefully place the CPU into the socket by using a purely vertical motion. Step 3-4. Verify that the CPU is within the socket and properly mated to the orient keys. Step 4. Close the socket: Step 4-1. Rotate the load plate onto the IHS. Step 4-2. While pressing down lightly on load plate, engage the load lever. Step 4-3. Secure load lever with load plate tab under retention tab of load lever. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
17
17
17
17
17
black
line
black
line
Pin1
alignment
key
alignment
key
Pin1
1366-Pin CPU
1366-Pin Socket
Step 3.
Insert the 1366-Pin CPU:
Step 3-1.
Hold the CPU by the edges where are
marked with black lines.
Step 3-2.
Orient the CPU with IHS (Integrated Heat
Sink) up. Locate Pin1 and the two ori-
entation key notches.
For proper inserting, please ensure to match the two orientation key
notches of the CPU with the two alignment keys of the socket.
Step 3-3.
Carefully place the CPU into the socket
by using a purely vertical motion.
Step 3-4.
Verify that the CPU is within the socket
and properly mated to the orient keys.
Step 4.
Close the socket:
Step 4-1.
Rotate the load plate onto the IHS.
Step 4-2.
While pressing down lightly on load
plate, engage the load lever.
Step 4-3.
Secure load lever with load plate tab
under retention tab of load lever.
orientation key
notch
orientation key
notch