Acer AW2000ht-AW170ht F1 Acer AW2000ht w AW170htx F1 Server Service Guide - Page 61

4. Install the memory module. a. Align then insert the DIMM ( ) into the socket. b. Push down the DIMM ( )to the socket until the retaining clips snap inward. NOTE: The DIMM slot is slotted to ensure proper installation. If you insert a DIMM but it does not fit easily into the socket, you may have inserted it incorrectly. Reverse the orientation of the DIMM and insert it again. 5. Reconfigure the system memory. See below for more information. Memory removal IMPORTANT:Before removing any DIMM from the mainboard, make sure to create a backup file of all important data. 1. Remove the memory module. a. Press the holding clips ( ) on both sides of the DIMM slot outward to release the DIMM. b. Gently pull the DIMM upward ( ) to remove it from the DIMM slot. 2. If you intend to install a new memory module, refer to the previous section. Reconfiguring the system memory: The system automatically detects the amount of memory installed. Run the BIOS setup to view the new value for total system memory and make a note of it. Hardware removal and installation 55