Acer AW2000ht-AW170ht F1 Acer AW2000ht w AW170htx F1 Server Service Guide - Page 87

Chapter 10 BIOS Beep Codes During POST (Power-On Self-Test) routines, which are performed each time the system is powered on, errors may occur. Non-fatal errors are those, which, in most cases, allow the system to continue the boot-up process. The error messages normally appear on the screen. Fatal errors are those which will not allow the system to continue the boot-up procedure. If a fatal error occurs, you should consult with your system manufacturer for possible repairs. Boot Block Beeps Codes Number of Beeps 1 2 3 4 5 7 10 11 12 13 Description No media present. (Insert diskette in floppy drive A:) 'AMIBOOT.ROM' file not found in root directory of diskette in A: Insert next diskette if multiple diskettes are used for recovery Flash programming successful File read error No Flash EPROM detected Flash erase error Flash program error 'AMIBOOT.ROM' file size error BIOS ROM image mismatch (file layout does not match image present in flash device POST BIOS Beep Codes Number of Beeps 1 3 6 7 8 Description Memory refresh timer error Base memory read/write test error Keyboard controller BAT command failed General exception error (processor exception interrupt error Display memory error (system video adapter) Chapter 10 81