Acer Aspire 2010 Aspire 2010/2020 Service Guide - Page 69

Aspire 2010/2020 Disassembly Procedure This section will guide you how to disassemble the system when you need to perform system service. Please also refer to the disassembly video, if availabled. CAUTION: Before you proceed,make sure you have turned off the system and all peripherals connected. Disassemble the Battery and HDD 1. Release the battery lock and slide the battery latch. 2. Then remove the battery pack. 3. Remove the two screws to release the hard drive door.Then take it away. Disassemble the Wireless 1. Remove the one screw to release the mini door, and take it away. 2. Disconnect the two wireless cables. 3. Then take the wireless board from the base. Disassemble the RAM and ODD 1. Remove the one screw to release the RAM door and remove it. 2. Press down the both side latches to release the RAM board. 3. Remove the one screw to release the ODD module. 4. Then push the inner position to remove the ODD from the base. 5. Pull the entire ODD moudle from the system. Chapter 3 Aspire 2010/2020