Acer Aspire 7560 Aspire 7560, 7560G Service Guide - Page 66

Security 0 The Security tab shows parameters that safeguard and protect the computer from unauthorized use. InsydeH20 Setup Utility Information Main Security Boot Exit Supervisor Password Is: User Password Is: HDD Password Is: Set Supervisor Password Set User Password Set HDD Password Password on Boot Clear Clear Clear [Enter] [Enter] [Enter] [Disabled] Rev. 3.5 Item Specific Help Supervisor Password controls access to the whole setup utility. It can be used to boot up when Password on boot is enabled. F1 Help ESC Exit  Select Item  Select Menu F5/F6 Enter Change Values Select>SubMenu F9 Setup Default F10 Save and Exit Figure 2-3. BIOS Security Table 2-3 describes the parameters shown in Figure 2-3. Table 2-3. BIOS Security Parameter Description Option Supervisor Password Is Supervisor password setting Clear or Set User Password Is User password setting Clear or Set HDD0 Password Is HDD0 password setting Clear or Set Set Supervisor Password Option to set supervisor password N/A Set User Password Option to set user password N/A Set HDD0 Password Option to set HDD0 password N/A Password on Boot NOTE: If Power-on Password authentication is enabled, the BIOS password can only be cleared by initiating the Crisis Disk Recovery procedure. Refer to BIOS Recovery by Crisis Disk. Shows if password is required during system boot Disabled or Enabled 2-8 System Utilities