Acer Ferrari 1000 Service Guide

Acer Ferrari 1000 Manual

Acer Ferrari 1000 manual content summary:

  • Acer Ferrari 1000 | Service Guide - Page 1
    Acer Ferrari 1000 Service Guide Service guide files and updates are available on the ACER/CSD web. For more information, please refer to http:/ /csd.acer.com.tw PRINTED IN TAIWAN
  • Acer Ferrari 1000 | Service Guide - Page 2
    Revision History Please refer to the table below for the updates of notebook Ferrari 1000 service guide. Date Chapter Updates II
  • Acer Ferrari 1000 | Service Guide - Page 3
    © 2006 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or
  • Acer Ferrari 1000 | Service Guide - Page 4
    specifically disclaims any warranties of merchantability or fitness for any particular purpose. Any Acer Incorporated software described in this manual servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Acer is a registered trademark of Acer
  • Acer Ferrari 1000 | Service Guide - Page 5
    used in this manual: SCREEN MESSAGES Denotes actual messages that appear on screen. NOTE WARNING CAUTION IMPORTANT Gives bits and pieces of additional information related to the current topic. Alerts you to any damage that might result from doing or not doing specific actions. Gives precautionary
  • Acer Ferrari 1000 | Service Guide - Page 6
    or extra memory capability). These LOCALIZED FEATURES will NOT be covered in this generic service guide. In such cases, please contact your part number change is made, it will not be noted in the printed Service Guide. For ACER-AUTHORIZED SERVICE PROVIDERS, your Acer office may have a DIFFERENT part
  • Acer Ferrari 1000 | Service Guide - Page 7
    System Specification 1 Specification 1 10 Upper View 10 Bottom View 10 External Optical Disk Drive 11 Front View 11 Connecting the Optical Drive 11 Indicators 12 Easy-launch Buttons 13 Touchpad 14 Touchpad Basics 14 Using the Keyboard 15 Lock keys and Embedded Numeric Keypad 15 Windows
  • Acer Ferrari 1000 | Service Guide - Page 8
    19 Installation 19 Usage 19 Acer Bluetooth® VoIP Phone 20 Layout 20 LED Indicators 21 Charging the Phone 21 Using Acer Voice Connection Manager (VCM 22 Connecting the Phone to Your Notebook . 23 Using the Phone 24 Acer OrbiCam 25 Front View 25 Rotating the Acer OrbiCam 25 Launching the
  • Acer Ferrari 1000 | Service Guide - Page 9
    Procedure 68 Removing the Battery Pack 68 Removing the HDD Module 68 Removing the RAM Module/Mini PCI Card . 69 Removing the Keyboard 70 Removing the LCD Module from the Main Unit 71 Disassembling the Main Unit 72 Disassembling the LCD Module 76 Chapter Four Troubleshooting 79 System Check
  • Acer Ferrari 1000 | Service Guide - Page 10
    Chapter Five Jumper and Connector Location 99 Main Board 99 Bottom Side 99 Upper Side 101 Chapter Six FRU (Field Replaceable Unit) 102 Parts and Exploded Diagram 103 X TOC
  • Acer Ferrari 1000 | Service Guide - Page 11
    1 System Specification Specification Operating System • Windows VistaTM Capable • Windows VistaTM Premium Ready • Genuine Windows® XP Professional x 64 Edition • Genuine Windows® XP Professional (Service Pack 2) • Genuine Windows® XP Home Edition (Service Pack 2) • Genuine Windows® XP Media Center
  • Acer Ferrari 1000 | Service Guide - Page 12
    -Picture CardTM (xD) Communication • Acer Video Conference featuring Voice and Video over Internet Protocol (VVoIP) support via Acer OrbiCamTM and optional Acer Ferrari Bluetooth® VoIP phone • Acer OrbiCamTM 1.3 megapixel CMOS camera (LCD panel-mounted), featuring (for selected model): • 225 degree
  • Acer Ferrari 1000 | Service Guide - Page 13
    CPU power management standards: Stand-by and Hibernation power-saving modes support • 57W 5200mAh 6-cell Li-ion battery pack and 22W 2000mAh 3-cell Li-Ion battery pack • Five-hour battery life with two battery packs • Acer QuicChargeTM technology: • 80% charge in 1 hour • 2-hour rapid charge system
  • Acer Ferrari 1000 | Service Guide - Page 14
    • NTI CD-MakerTM • Acer Voice Connection Manager • Acer OrbiCam Dimensions and Weight • battery pack Environment • Temperature: • Operating: 5 oC to 35 oC • Non-operating: -20 oC to 65 oC • Humidity (non-condensing): • Operating: 20% to 80% • Non-operating: 20% to 80% Note: This specifications
  • Acer Ferrari 1000 | Service Guide - Page 15
    RS485 465 FCBGA PG 9,10,11,12 ZH3 ASSY P/N :31ZH3MB0008 ZH3 MB C/S ASSY P/N: 41ZH3CS0001 ZH3 MB S/S ASSY P/N: 51ZH3SS0003 ZH3 PCB P/N: DA0ZH3MB8A3 CPU VIN CHARGER PG 34 SATA - HDD PG 23 PATA - HDD PG 23 SATA0 PATA 100 Azalia A_LINK SB460 549 BGA USB2.0 (P0~P7) PCI Bus 33MHz Bluetooth USB7
  • Acer Ferrari 1000 | Service Guide - Page 16
    Front View # Item 1 Built-in camera 2 Display screen 3 Power button 4 Keyboard 5 Palmrest 6 Touchpad 7 Click buttons (left and right) 8 Status indicators 9 Easy-launch buttons 10 Microphone Description 1.3 megapixel web camera for video communication. Also called Liquid-Crystal Display (LCD
  • Acer Ferrari 1000 | Service Guide - Page 17
    # Icon Item Closed Front View # Item Description Description "Launch keys" on page 10 # Icon Item Description # Icon Item # 1 Icon Item Headphones/speaker/ line-out jack with S/ PDIF support Bluetooth communication button/indicator Wireless communication button/indicator Infrared port
  • Acer Ferrari 1000 | Service Guide - Page 18
    2.0 devices (e.g., USB mouse, USB ## IIccoonn IItteem m DescricDpatemiosecnrraip).tion 2 Ethernet (RJ-45) port Connects to an Ethernet 10/100-based or 10/100/1000- # Icon Item basDedesncertiwpotiroksn. 3 Modem (RJ-11) port Connects to a phone line. 4 8 External display (VGA) Connects to
  • Acer Ferrari 1000 | Service Guide - Page 19
    Item Description Description # Icon Item Description 1 124-pin Acer ezDock Connects to Acer ezDock. connector 2 N/A 3 Battery DC-in jack Powers the computer. Connects to an AC adapter. Base View Note: # Item 1 Battery bay 2 Battery release latch 3 Memory compartment 4 Hard disk bay
  • Acer Ferrari 1000 | Service Guide - Page 20
    wheel mimics your cursor pressing on the right scroll bar of Windows applications. 3 Right click button Press the right button to Item Description # Icon Item 1 Bluetooth button Description Press the button to turn on Bluetooth communication. 2 N/A 10 Power button Turns the mouse on and
  • Acer Ferrari 1000 | Service Guide - Page 21
    External Optical Disk Drive Front View # Item 1 Eject button Description Ejects the optical disk when the computer is on. Connecting the Optical Drive Please connect the 1394 cable to the 1394 port. Press the drive eject button to eject the optical disk when the computer is on. Chapter 1 11
  • Acer Ferrari 1000 | Service Guide - Page 22
    keys" on page 10 "Launch keys" on page 10 # Icon Item Description Icon Item Caps Lock Description Lights up when Caps Lock is activated. # Icon Item # Icon Item Description Description Num Lock Lights up when Num Lock is activated. HDD # Icon Item Power Bluetooth Indicates when the hard
  • Acer Ferrari 1000 | Service Guide - Page 23
    Manager. Easy-launch button Mail Web browser P Default application "Easy-launch b"uEattsoyn-lsa"unocnhpbaugteto1n0s" on page 10 Acer Empowering Technology (user-programmable) E-mail application (user-programmable) Internet browser (user-programmable) User-programmable "Easy-launch buttons
  • Acer Ferrari 1000 | Service Guide - Page 24
    means the cursor responds as you move your finger across the surface of the touchpad. The central location on the palmrest provides optimum comfort and support. Touchpad Basics The following items will show you how to use the touchpad. • Move your finger across the touchpad (2) to move the cursor
  • Acer Ferrari 1000 | Service Guide - Page 25
    numeric keypad, separate cursor, lock, Windows, function and special keys. Lock keys and Embedded Numeric Keypad The keyboard has three lock keys which you assume cursor and other shortcut functions. When Scroll Lock is on, the screen moves one line up or down when you press the up or down arrow
  • Acer Ferrari 1000 | Service Guide - Page 26
    . manner. Windows keys The keyboaKredy has two keys thDeastcrpipetriofnorm Windows-specific functions. Key Windows key Application ctivates the next Taskbar button. < + E+>:p: ens the My Computer window. + : + : Opens Help and Support. < > + : < > + : +: <
  • Acer Ferrari 1000 | Service Guide - Page 27
    or key combinations to access most of the computer's controls like screen brightness, volume output and the BIOS utility. To activate hotkeys, press and hold the Acer ePowerpageLa2u0nches the Acer ePower Ma"naAgecmeernteinMAcaenr ager" on
  • Acer Ferrari 1000 | Service Guide - Page 28
    or word processor. 2. Hold key then AplrteGssr>the number kon the upper-center side of the keyboard. Note: Some fonts and software do not support the Euro symbol. Please refer to www.microsoft.com/ typography/faq/faq12.htNmotfeor more information. www.microsoft.com/typography/faq
  • Acer Ferrari 1000 | Service Guide - Page 29
    Setup Wizard. 4. Select I want to find a specific Bluetooth device and configure how this computer will use its devices. Then click Next. 5. From the drop-down menu, select Show mice, keyboards and joysticks, and then click on the Search Again button. 6. The Acer mouse will be discovered. Click on
  • Acer Ferrari 1000 | Service Guide - Page 30
    Acer Bluetooth® VoIP Phone Layout # Item Description "Launch keys" on page 10 # Icon Item # Icon Item Description Description 1 N/A PC Card (PCMCIA) interface connector Connects the computer's PCMCIA card interface. 2 N/A Speaker Speaker delivers audio output. 3 N/A Volume up/down
  • Acer Ferrari 1000 | Service Guide - Page 31
    pushed on the slot. Note: The notebook deteNWcotiztseat:rhde device and Ndios,pnlaoyt sthaisNtiemwe, Device WizNaerwd Dweivnicdeow. Click No, not this time, then close the window. 4. The power/charge indicator lights up during charge and turns off when the battery is full. Eject the phone from the
  • Acer Ferrari 1000 | Service Guide - Page 32
    the steps below to install the Acer VCM application in the notebook. 1. Place the Acer VCM installation CD to the optical drive. 2. Explore the installation CD, then locate and double-click on the AcerVCM Setup.exe file to start installation. 3. Follow screen instructions to proceed. Info Bar After
  • Acer Ferrari 1000 | Service Guide - Page 33
    , then changes the phone status to Default Use. Note: Click Rescan if the Acer Bluetooth VoIP Phone does not appear on the list. After pairing, Acer VCM automatically connects the phone to the notebook each time you turn the phone on. There is no need to connect the phone again. Chapter 1 23
  • Acer Ferrari 1000 | Service Guide - Page 34
    an internet call from your instant messaging service (i.e. MSN® Messenger, Skype), press the Bluetooth connection/pairing button. The incoming call linked to the notebook. Every time you turn the phone on, Acer VCM automatically links it to the notebook. When linked, the Bluetooth connection/pairing
  • Acer Ferrari 1000 | Service Guide - Page 35
    The camera's 225-degree ergonomic rotation allows you to capture high-resolution photos or videos up front or at the back of the LCD panel. The Acer OrbiCam fully supports the Acer Video Conference technology so you transmit the best video conference quality over an instant messenger service. Front
  • Acer Ferrari 1000 | Service Guide - Page 36
    Launching the Acer OrbiCam To launch the Acer OrbiCam, double-click on the Acer OrbiCam icon on the screen, or Click Start > All Programs > Acer > Acer OrbiCam. The Acer OrbiCam capture window will appear as below. Changing the Acer OrbiCam Settings Resolution To change the capture resolution, click
  • Acer Ferrari 1000 | Service Guide - Page 37
    Folder tabs. Use the options to change the capture window size, preview settings, and the folder for captured photos or videos. Camera Settings Basic Settings Click the Camera Settings icon on the bottom right corner of the capture display, then select Camera Settings from the pop-up menu. You can
  • Acer Ferrari 1000 | Service Guide - Page 38
    and anti-flicker settings, and turn on/off the camera indicator. Zoom/Face Track Settings allows you to adjust the zoom level and turn the face tracking feature on or off. Capturing Photos or Videos To capture a photo or a video clip, rotate the Acer OrbiCam to get the desired angle, then click the
  • Acer Ferrari 1000 | Service Guide - Page 39
    in the world. Enabling the Acer VisageON The Acer VisageON technology comes with two features: Face tracking and Video effects. The Face Tracking feature tracks your head movement and automatically centers your face in the capture window. The video effects feature allows you to select and apply
  • Acer Ferrari 1000 | Service Guide - Page 40
    or Multiple Users from the pop-up menu. For multiple users, the face tracking feature automatically centers all the users' face in the capture window, otherwise the utility centers the face of the user closest to the camera. 2. Click the right icon to zoom in/out or reset the current view. 3. Click
  • Acer Ferrari 1000 | Service Guide - Page 41
    in the video effects section of the VisageON window. Note: 1. When using avatars, you may have to calibrate the face points to achieve better tracking. Follow screen instructions in the VisageON window to continue. 2. You may use video effects when using the camera for IM chat/video sessions or call
  • Acer Ferrari 1000 | Service Guide - Page 42
    to the frequently used functions and manage the notebook. Displayed by default in the upper-right corner of the screen, it features the following handy utilities: • Acer ePower Management extends battery power via versatile usage profiles. • Acer ePresentation Management connects to a projector and
  • Acer Ferrari 1000 | Service Guide - Page 43
    is Maximum Performance. You can adjust CPU speed, LCD brightness and other settings, or click on buttons to turn the following functions on/off: wireless LAN, Bluetooth, CardBus, fireware (1394), wired LAN and optical device if supported. DC Mode (Battery Mode) There are four pre-defined profiles
  • Acer Ferrari 1000 | Service Guide - Page 44
    options, click Settings to: • Set alarms. • Reload factory defaults. • Select what actions to be taken when the cover is closed or the power button is pressed. • Set passwords for accessing the system after Hibernation or Stand-by. • View information about Acer ePower Management. 34 Chapter 1
  • Acer Ferrari 1000 | Service Guide - Page 45
    . Note: If the restored resolution is not correct after disconnecting a projector, or you need to use an external resolution that is not supported by Acer ePresentation Management, adjust your display settings using Display Properties or the utility provided by the graphics vendor. Chapter 1 35
  • Acer Ferrari 1000 | Service Guide - Page 46
    by unauthorized persons. It is conveniently integrated with Windows Explorer as a shell extension for quick and easy data encryption/decryption and also supports on-the-fly file encryption for MSN Messenger and Microsoft Outlook. The Acer eDataSecurity Management setup wizard will prompt you for
  • Acer Ferrari 1000 | Service Guide - Page 47
    Chapter 1 37
  • Acer Ferrari 1000 | Service Guide - Page 48
    defined recovery point) • Recovery from CD or DVD Note: If the computer did not come with a Recovery CD or System CD, please use Acer eRecovery Management's System backup to optical disk feature to burn a backup image to CD or DVD. To ensure the best results when recovering the system using a CD or
  • Acer Ferrari 1000 | Service Guide - Page 49
    Management allows you to inspect hardware specification, change BIOS passwords or other Windows settings, and to monitor the system health status. Acer eSettings Management also: • Provides a simple graphical user interface for navigation. • Displays general system status and advanced monitoring
  • Acer Ferrari 1000 | Service Guide - Page 50
    system optimization tool that boosts the performance of the Acer notebook. It provides an express optimization method to release unused • Speed optimization: improves the usability and performance of the Windows XP system. • Memory optimization: releases unused memory and check usage. 40 Chapter
  • Acer Ferrari 1000 | Service Guide - Page 51
    Utilities Note: Note: The system utilities work under Microsoft Windows XP only. Acer GridVista (dual-display compatible) Note: This feature is only available on certain models. To enable the dual monitor feature of the notebook, first ensure that the second monitor is connected, then select
  • Acer Ferrari 1000 | Service Guide - Page 52
    is set to the manufacturer's recommended value. Note: Note: Launch Manager Launch Manager allows"yEoausyt-olasuentcthhebufottuornes"asoyn-lapuangceh2b4uttons located above the keyboard. You can access the Launch Manager by clicking on Start > All Programs > Launch Manager to start the application
  • Acer Ferrari 1000 | Service Guide - Page 53
    System Scan. 4. When the scan is complete, a scan summary appears. Click Finished. Finished You can schedule customized virus scans that tun unattended on specific dates and times or at periodic intervals. If you are using the computer when the scheduled scan begins, it runs in the background so
  • Acer Ferrari 1000 | Service Guide - Page 54
    logic System clock BIOS ROM KBC PCMCIA & IEEE 1394 & Memory card reader Super I/O IR Audio Codec & Amplifier LAN Specification ATi RS485M + Item Chipset Package Feature Power Specification ATi RS485M 465-pin FCBGA package, 21mm x 21mm • 200/400/800/1000MHz HyperTransport interface support • One x
  • Acer Ferrari 1000 | Service Guide - Page 55
    1.8V core, 3.3V, 5V CMOS I/O System Clock Item Chip Package Feature Clock synthesizer Power Specification ICS ICS951462 or pin compatible device 64-pin TSSOP • Spread spectrum function support for reducing EMI • SM bus interface support • 133/166MHz for CPU • 100MHz clock buffer for RS485M, SB460
  • Acer Ferrari 1000 | Service Guide - Page 56
    data transfer rate (Mbytes/sec. max.): 150 / 150 / 150 Internal transfer rate (Mbytes/sec. max.): 57.6 / 57.6 / 57.6 ATA data transfer mode supported: SATA 1.0, SATA II, PIO modes 0-4, Multiword DMA modes 0-2, Ultra DMA modes 0-6 Cache buffer: 8MB Bytes per sector: 512 / 512 / 512 Voltage tolerance
  • Acer Ferrari 1000 | Service Guide - Page 57
    (write): CD-R, CD-RW Manual load max. 2100mA 5V +/- 5% (Operating) BIOS ROM Item Type Package Block Size BIOS Item Vendor Version Feature Description Phoenix Phoenix BIOS V0.3104 • 1MB flash RIOM for system BIOS • Suspend to RAM (S3) / Disk (S4) • Various hot keys for system control • Support boot
  • Acer Ferrari 1000 | Service Guide - Page 58
    KBC Item Chip Package Features Description NSPC97551 LQFP 176-pin package • Host interface, based on Intel's LPC interface specification Revision 1.0 • PC01 REV 0.3 and ACPI 1.0b compliant • 16-bit RISC core with 2MB address space, speed up to 20MHz • Share BIOS flash memory (internal and/or
  • Acer Ferrari 1000 | Service Guide - Page 59
    MDC 1.5 card RJ-11 Super I/O Item Chip Package Feature Power consumption Description NS PC87383 64-pin TQFP package • Parallel interface support: 1. An Enhanced Parallel Port (EPP) compatible with EPP 1.9, EPP1.7 of the Xircom specification support too 2. An Extended Capabilities port that is IEEE
  • Acer Ferrari 1000 | Service Guide - Page 60
    End voltage Charging current max. Discharging Wattage max. Charging voltage Surroundings temperature range for shipped battery Specification Panasonic Hummingbird 3 cell 2.0H Panasonic Hummingbird 6 cell 10.8V 11.1V 2250mAh 4700mAh 2150mAh 4500mAh 12.6V max., 430mA max. x eight hours 12
  • Acer Ferrari 1000 | Service Guide - Page 61
    support AUO 12.1 WXGA B121EW03-V3 GLARE 12.1" WXGA 261.12 (W) x 163.2 1280 x 3 (RGB) x 800 normally white Glare, Hardness 3H, Reflectance 4.3% RGB vertical stripe 0.204 (H) x 0.204 (V) 180 (typical) 400 (typical) Rise: 10 feature Rated voltage Input voltage range Frequency range Specification
  • Acer Ferrari 1000 | Service Guide - Page 62
    73oC, Fan off = 68oC, Fan RPM = 3800, 38 dBA Level 3 Fan on = 83oC, Fan off = 78oC, Fan RPM = 4200, 40 dBA Throttling 50% On = 92oC, Off = 86oC Port Replicator Item Features Description • 120 pins for signals and four pins for power • Power supplied from Acer ezDock • Max. six USB ports support
  • Acer Ferrari 1000 | Service Guide - Page 63
    refer to Chapter 4 Troubleshooting when problem arises. To activate the BIOS Utility, press m during POST (when "Press to enter Setup" message is prompted on the bottom of screen). The setup screen displays BIOS as follows: Function Information Main Advanced Security Boot Exit Item Display
  • Acer Ferrari 1000 | Service Guide - Page 64
    are installed on Primary IDE master, then it will display a blank line This field reports the BIOS version of system This field reports the VGA version of the system This field reports the keyboard controller version of the system This item will show the Serial number of system. This item will
  • Acer Ferrari 1000 | Service Guide - Page 65
    only mode. Both: Simultaneously enable both the integrated LCD screen and the system's external video port (for an external CRT or projector). When this is selected, Boot from LAN feature is enabled. When this is not selected, Boot from LAN feature is then disabled. When this is selected, users can
  • Acer Ferrari 1000 | Service Guide - Page 66
    screen contains parameters involving your hardware devices. It also provides advanced settings of the system. Parameter Serial Port Infrared Port Parallel Port Description Configure serial port A using options: [Disabled]: No configuration [Enabled]: User configuration [Auto]: BIOS Auto]: BIOS or
  • Acer Ferrari 1000 | Service Guide - Page 67
    Parameter Mode Description Set the mode for the parallel port Option Output only Bi-directional EPP ECP Chapter 2 57
  • Acer Ferrari 1000 | Service Guide - Page 68
    password support consists of a Supervisor Password, User Password, and Hard Disk Password. All the passwords are stored in a non-volatile storage device (EEPROM). All the passwords obeys the following rules: • Password Policy • All the passwords can be set or cleared in BIOS Setup Security screen
  • Acer Ferrari 1000 | Service Guide - Page 69
    > for entering BIOS Setup Utility. • If the Supervisor Password is set and Password on boot is enabled, the manually power off the system. • User Password: • If the User Password is set, the system will pop up the password dialog box to ask for the password when the users press for entering BIOS
  • Acer Ferrari 1000 | Service Guide - Page 70
    It identifies all the bootable devices in the system and attempts to boot them in the order specified. Bootable devices include the diskette drive the CDROM/DVD drive in module bay and onboard LAN device. Parameter Boot priority order Description Keys used to view or configure devices: Up and Down
  • Acer Ferrari 1000 | Service Guide - Page 71
    Exit Parameter Exit Saving Changes Exit Discarding Changes Load Setup Default Discard Changes Save Changes Description Exit System Setup and save your changes to CMOS Exit utility without saving Setup data to CMOS Load default values for all SETUP items Load previous values from CMOS for all SETUP
  • Acer Ferrari 1000 | Service Guide - Page 72
    BIOS Password Removal SOP Please follow the steps below to remove the BIOS password. Step One Machine 1 Key in wrong Supervisor Password three times and System Disabled will show. Step Two Machine 2: Run BIOS_PW.EXE 1. Key in bios_pw 14452 0 2. Then choose one string. 62 Chapter 2
  • Acer Ferrari 1000 | Service Guide - Page 73
    Step Three Machine 1 1. Reboot system and key in qjjg9vy or 07yqmjd in the BIOS user password column. Chapter 2 63
  • Acer Ferrari 1000 | Service Guide - Page 74
    HDD Password Removal SOP Please follow the steps below to remove the HDD password. Step One Machine 1 1. Key in wrong HDD password three times and HDD password error code will come out. Step Two Machine 2: Run HDD_PW.EXE 1. Key in hdd_pw 15494 0 2. Select 2 (upper case ASCII Code). 3. Then choose
  • Acer Ferrari 1000 | Service Guide - Page 75
    Step Three Machine 1 Reboot system and key in 0KJFN42 or UVEIQ96 in the HDD user password column. Chapter 2 65
  • Acer Ferrari 1000 | Service Guide - Page 76
    on how to disassemble the Ferrari 1000 for maintenance and troubleshooting. To disassemble the notebook, you need the tools below: • Wrist ground strap and conductive mat for preventing electrostatic discharge • Small Philips screw driver • Flat head screw driver • Hexagonal driver • Tweezers NOTE
  • Acer Ferrari 1000 | Service Guide - Page 77
    gives you a graphic representation on the entire disassembly and reassembly and instructs you how to remove the components. # M3*0.5+3.5I g SCREW M2.5*4.0-I(NYLOK)EU h I2.5*4T-BKAGH(4,0.8) i SCREW M2.5*4-I(BNI) Acer Part No. 86.FR6V7.001 86.FR6V7.002 86.FR6V7.003 86.FR6V7.004 86.A08V7
  • Acer Ferrari 1000 | Service Guide - Page 78
    Disassembly Procedure Removing the Battery Pack 1. Unlock the battery lock to the end as the arrow indicates. 2. Slide the battery latch to the end and hold it. Then remove the battery pack. Removing the HDD Module 1. Release the two screws fastening the HDD module cover. 2. Detach the HDD module
  • Acer Ferrari 1000 | Service Guide - Page 79
    this step to detach another RAM module. 4. Disconnect the main and the auxiliary antennae. The main antenna is black and the auxiliary antenna is white. The gray cable is protected by a plastic cover and serves for nothing in this model. 5. Release the two screws holding the Mini PCI card. 6. The
  • Acer Ferrari 1000 | Service Guide - Page 80
    the Keyboard 1. Release the left latch securing the keyboard plate. 2. Release the right latch securing the keyboard plate. 3. Carefully detach the keyboard plate and place the keyboard plate as shown. 4. Release the keyboard FFC lock carefully because it is fragile. Then detach the keyboard plate
  • Acer Ferrari 1000 | Service Guide - Page 81
    the Main Unit After removing the keyboard plate, please follow the steps below to remove the LCD module. 1. Slightly pull out the main and the auxiliary antennae and the gray cable. 2. Disconnect the microphone cable. 3. Release the four screws holding the LCD module. 4. Slightly pull out the four
  • Acer Ferrari 1000 | Service Guide - Page 82
    Disassembling the Main Unit Separating the Upper Case and the Lower Case 1. Carefully release the button board FFC lock then disconnect the button board FFC. 2. Slightly
  • Acer Ferrari 1000 | Service Guide - Page 83
    module cable. 2. Release the screw holding the Bluetooth module then detach the Bluetooth module. Removing the Main Board 1. Disconnect the speaker cable. 2. Slightly pull the edge of the lower case as the arrow indicates because the DC board
  • Acer Ferrari 1000 | Service Guide - Page 84
    Removing the Modem Board 1. Release the screw holding the modem board. 2. Detach the modem board from the main board and disconnect it. Chapter 3 74
  • Acer Ferrari 1000 | Service Guide - Page 85
    1. Slightly disconnect the system fan cable. 2. Release the four screws holding the thermal module then detach the thermal module. 3. Disconnect the DC board cable. Removing the CPU 1. Release the screw securing the CPU by turning the flat-headed screw driver counter clockwise. 2. Then carefully
  • Acer Ferrari 1000 | Service Guide - Page 86
    Disassembling the LCD Module Removing the LCD Bezel 1. Detach the mylars covered on screws then release the six screws securing the LCD bezel. 2. Carefully detach the LCD bezel from the LCD module as shown till the LCD bezel is total removed. Removing the Inverter Board 1. Carefully disconnect the
  • Acer Ferrari 1000 | Service Guide - Page 87
    CCD module together. 3. Put the LCD panel and the CCD module on a flat and stable surface. 4. Carefully disconnect the CCD module. 5. Tear off the tape holding the LCD cable. 6. Carefully pull and disconnect the LCD cable. NOTE: When you remove the CCD module and the LCD cable, please do not press
  • Acer Ferrari 1000 | Service Guide - Page 88
    Removing the LCD Brackets 1. Release the four screws securing the left and the right LCD brackets. 2. Then remove the left and the right LCD brackets. Chapter 3 78
  • Acer Ferrari 1000 | Service Guide - Page 89
    Chapter 4 Troubleshooting Please use the following procedures as a guide for computer problems. NOTE: The diagnostic tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options may occur errors or invalid responses. 1. Obtain the detailed fail symptoms as
  • Acer Ferrari 1000 | Service Guide - Page 90
    or make the drive fail. 1. Boot from the diagnostic diskette and start the diagnostic programs. 2. See if FDD test is passed as the programs run the FDD test. 3. Follow the instructions in the message window. If errors occur with the internal diskette driver, reconnect the diskette connector on the
  • Acer Ferrari 1000 | Service Guide - Page 91
    the procedures below to correct the memory errors. 1. Boot from the diagnostic diskette and start the diagnostic programs. 2. Go to the diagnostic memory in the test items. 3. Press F2 in the test items. 4. Follow the instructions in the message window. NOTE: Make sure that the DIMM is correctly
  • Acer Ferrari 1000 | Service Guide - Page 92
    problem is on recharging or discharging. 1. Check the Power Management in Control Panel. 2. Then confirm that the parameters shown in the screen for Current Power Source and Total Battery replace the battery pack. If the charge indicator still does not light up, replace the AC / DC charger board.
  • Acer Ferrari 1000 | Service Guide - Page 93
    After you use the touchpad, the pointer drifts on the screen for a short time. This self-acting pointer movement will occur when a slight, steady pressure is applied to the touchpad pointer. This symptom is not a hardware problem. Chapter 4 83
  • Acer Ferrari 1000 | Service Guide - Page 94
    problem, put the original part back in the computer. Do not replace a non-defective FRU. The error messages are listed in the coming pages to indicate the BIOS signals on the screen Error Message Equipment Configuration Error Causes: • CPU BIOS Update Code Mismatch • IDE Primary Channel Master Drive
  • Acer Ferrari 1000 | Service Guide - Page 95
    board DIMM System board DIMM System board Replace RTC battery and Run BIOS Setup Utility to reconfigure system time, then reboot system. RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot
  • Acer Ferrari 1000 | Service Guide - Page 96
    beep, power-on indicator turns on and a blinking cursor shown on LCD during POST. No beep during POST but system runs correctly. FRU/Action in Sequence BIOS ROM System board Run Load Default Settings in BIOS Setup Utility. RTC battery System board Enter Setup and see if fixed disk and drive A: are
  • Acer Ferrari 1000 | Service Guide - Page 97
    POST values. Jump to UserPatch0. Initialize keyboard controller. BIOS ROM checksum. 8254 timer initialization. 8237 seeing which on e triggers the problem. • Check the main board. • Check the main board. • Check the main board. • Check the keyboard. • Check the keyboard controller. • Check the main
  • Acer Ferrari 1000 | Service Guide - Page 98
    . Initialize interrupt vector. Initialize BIOS interrupt. Check ROM copyright notice. What to Check (Recommended) • Treat as an expansion card problem. • Check the main board. • Check the system memory. • Check the main board. • Check the keyboard. • Check the keyboard controller. • Check the main
  • Acer Ferrari 1000 | Service Guide - Page 99
    card. • Check the keyboard. • Check the keyboard controller. • Check the main board. • Check the keyboard. • Check the keyboard controller. • Check the main board. • Check the keyboard. • Check the keyboard controller. • Check the main board. • Treat as an expansion card problem. • Check the main
  • Acer Ferrari 1000 | Service Guide - Page 100
    . Reinitialize onboard I/O ports. Initialize BIOS data area. Initialize extended BIOS data area. Initialize floppy controller. Check the main board. • Check the keyboard. • Check the keyboard controller. • Check the main board. • Treat as an expansion card problem. • Check the main board. • Check
  • Acer Ferrari 1000 | Service Guide - Page 101
    stroke. Enter SETUP. Clear in-POST flag. Check for errors. POST done - prepare to boot operating system. One beep. Check password (optional). Clear global descriptor table. Clear parity checkers. Clear screen (optional). Check virus and backup reminders. What to Check (Recommended) • Check the HDD
  • Acer Ferrari 1000 | Service Guide - Page 102
    . • Check the main board. • Treat as an expansion card problem. • Check the main board. • Check the main board. • Check the main board. • Check the main board. • Check the main board. • Check the keyboard. • Check the keyboard controller. • Check the main board. • Check the main board. • Check
  • Acer Ferrari 1000 | Service Guide - Page 103
    Missing pels in characters Abnormal screen Wrong color displayed LCD has extra horizontal or vertical lines displayed. Action in Sequence Enter BIOS Utility to execute Load Setup Default Settings, then reboot system. Reconnect the LCD connectors. Keyboard (if contrast and brightness function key
  • Acer Ferrari 1000 | Service Guide - Page 104
    Symptom/Error Battery can't be charged. Action in Sequence See Check the Battery Pack. Battery pack System board 94 Chapter 4
  • Acer Ferrari 1000 | Service Guide - Page 105
    hibernation. Keyboard (if control is from the keyboard) Hard LCD. LCD cover switch System board Battery fuel gauge in Windows does not go higher than 90%. Remove battery pack and let it cool for two hours. Refresh battery (continue to use battery until power off, then charge battery). Battery
  • Acer Ferrari 1000 | Service Guide - Page 106
    Board Serial or parallel port device problems. Ensure the Serial Port in the Devices Configuration" of BIOS Setup Utility is set to Enabled. Device driver Device cable Device System board Keyboard/Touchpad-Related Symptoms Symptom/Error Action in Sequence Keyboard (one or more keys) does not
  • Acer Ferrari 1000 | Service Guide - Page 107
    or software errors. FRU replacement should be considered only when a recurring problem exists. When analyzing an intermittent problems, follow the procedures below: 1. Run the advanced diagnostic test for the system board in loop mode at least 10 times. 2. If no error is detected, do not replace any
  • Acer Ferrari 1000 | Service Guide - Page 108
    FRU. 1. Power off the computer. 2. Visually check the devices. If any problems are found, replace the FRU. 3. Remove or disconnect all of the following devices: • Non-Acer devices • Printer, mouse, and other external devices • Battery Pack • Hard disk drive • DIMM • CD-ROM / Diskette drive module
  • Acer Ferrari 1000 | Service Guide - Page 109
    # Description 1 Processor 3 South bridge chipset 5 FIR 7 Bluetooth switch 9 Mic CONN. 11 5-in-1 card reader 13 USB CONN. # Description 2 North bridge chipset 4 RTC battery 6 Wireless switch 8 SPDIF / Line-out CONN. 10 Line-in CONN. 12 RTC battery CONN. 14 1394 CONN. Chapter 5 99
  • Acer Ferrari 1000 | Service Guide - Page 110
    # Description 15 DC board CONN. 17 DDR2 SODIMM 19 Wireless LAN card CONN. 21 USB CONN. 23 CRT CONN. 25 Modem card CONN. # Description 16 System battery pack CONN. 18 DDR2 SODIMM 20 USB CONN. 22 RJ11 & RJ45 CONN. 24 Docking CONN. 100 Chapter 5
  • Acer Ferrari 1000 | Service Guide - Page 111
    Upper Side # Description Processor 27 LVDS CONN. 29 Microphone CONN. 31 Keyboard FFC CONN. 33 Speaker CONN. # Description 26 PCMCIA CONN. 28 Power board CONN. 30 Button board CONN. 32 Bluetooth module CONN. 34 Touch pad FFC CONN. Chapter 5 101
  • Acer Ferrari 1000 | Service Guide - Page 112
    information available on your regional web or channel. For whatever reasons, a part number is changed, it will NOT be noted on the printed service guide. For Acer authorized service providers, your Acer office may have a different part number code from those given in the FRU list of this printed
  • Acer Ferrari 1000 | Service Guide - Page 113
    005 BT.00305.002 BT.00603.022 N/A BOARD BATTERY PANASONIC LI-ION 3S2P 6CELL 2600mAH ZH3 BATT PANA 6CELL S/P BT.00605.010 MODEM 56K (MDC)T60M845.02 EU MODEM 56K (MDC)T60M845.02 EU 54.AA7V7.001 BLUETOOTH MODULE FOXCONN T60H928.01 W/ANTENNA BLUETOOTH MODULE (T60H928.01) 54.TAXV7.001 MINI PCI
  • Acer Ferrari 1000 | Service Guide - Page 114
    PHOTO PARTNAME LCD INVERTER BOARD DESCRIPTION ZH3 LCD INVERTER S/P ACER PART NO. 19.FR6V7.001 N/A N/A N/A N/A N/A CABLE N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A MINI PCI WIRELESS BOARD FOXCONN 802.11ABG T60H921.10 MINI PCI WIRELESS BOARD FOXCONN ATHEROS 802.11N T60H971.00 MINI PCI
  • Acer Ferrari 1000 | Service Guide - Page 115
    ZH3 MDDEM S/P ACER PART NO. 50.FR6V7.001 BLUETOOTH CABLE CABLE ASSY ZH3 BLUETOOTH S/P 50.FR6V7.002 N/A POWER BOARD CABLE CABLE ASSY ZH3 DC S/P 50.FR6V7.003 LCD CABLE ASSY 12.1 IN. FOR CCD ZH3 LCD CABLE 12.1 FOR CCD S/P 50.FR6V7.003 CASE/COVER/BRACKET ASSEMBLY MIDDLE COVER ZH3 KB COVER
  • Acer Ferrari 1000 | Service Guide - Page 116
    -ZC1 S/P ACER PART NO. 42.FR6V7.004 N/A LCD COVER CARBON W/ ZH3 LCD COVER N-G TBD 3G ANTENNA FOR CCD CARBON S/P LCD BRACKET W/HINGE ZH3 HINGE-BKT-L-SZS- - L ZH3 S/P 33.FR6V7.002 LCD BRACKET W/HINGE ZH3 HINGE-BKT-R-SZS- - R ZH3 S/P 33.FR6V7.003 LCD COVER CARBON W/ ZH3 LCD COVER ANTENNA
  • Acer Ferrari 1000 | Service Guide - Page 117
    (-189) MERCURY 2 LF FW:3.06 ACER PART NO. KH.10001.009 "100G TOSHIBA KEYBOARD DARFON Chinese FR1000 KEYBOARD DARFON Spanish FR1000 KEYBOARD DARFON Thai FR1000 KEYBOARD DARFON Brazilian Portuguese FR1000 KEYBOARD DARFON Korea ZH3 K/B (TAIWAN) S/P ZH3 K/B (SPANISH) S/P ZH3 K/B (THAI) S/P ZH3
  • Acer Ferrari 1000 | Service Guide - Page 118
    DANISH) S/P ZH3 K/B (TURKISH) S/P ZH3 K/B (FRA-CAN) S/P ZH3 K/B (JAPAN) S/P ZH3 K/B (GREEK) S/P ZH3 K/B (HEBREW) S/P ZH3 K/B (RUSSIAN) S/P ZH3 K/B (CROATIA) S/P TBD TBD ZH3 K/B (CHINA) S/P ZH3 K/B (DUTCH) S/P ZH3 K/B (LA) S/P ZH3 K/B (USA) S/P ZH3 K/B (ICELAND) S/P ZH3 K/B (POLAND) S/P ACER PART NO
  • Acer Ferrari 1000 | Service Guide - Page 119
    PART PHOTO LCD PARTNAME DESCRIPTION LCD 12.1 IN. LCD MODULE NON GLARE W/ CCD ASSY ZH3 AU 12.1 LCD W/ OWWAN ASSY S/P ACER PART NO. 6M.FR6V7.001 N/A N/A N/A N/A N/A N/A CCD MODULE LCD 12.1 IN. LCD MODULE GLARE W/CCD ASSY LCD 12.1 IN. TFT WXGA AU B121EW03-V1 NONGLARE LCD 12.1 IN. TFT WXGA AU
  • Acer Ferrari 1000 | Service Guide - Page 120
    ZB2 RAM(512M)DDR2 S/P TBD ACER PART NO. KN.51203.025 KN. LCD-RUBBER-TOP-RZH3 (GAZH3008, REV3A)" "LCD-RUBBER-SIDE-ZH3 (GAZH3009, REV3A)" "BASE-FOOT-HD-ZH3 (GAZH3001, REV3A)" "BASE-FOOT-M-ZH3 (GAZH3011, REV3A)" ZH3 LCD-RUBBER-TOPL-ZH3 S/P ZH3 LCD-RUBBER-TOPR-ZH3 S/P ZH3 LCD-RUBBER-SIDEZH3 S/P ZH3
  • Acer Ferrari 1000 | Service Guide - Page 121
    HDD-IN-RUBBER-ZH3 "BASE-FOOT-R-ZH3 (GAZH3002, REV3A)" "BASE-FOOT-L-ZH3 (GAZH3003, REV3A) " "BASE-FOOT-ZH3 (GAZH3004, REV3A)" "KB-COVER-SCREWCAP-ZH3 (FCZH3029, REV3A)" DESCRIPTION ZH3 HDD-IN-RUBBERZH3 S/P ZH3 BASE-FOOT-R-ZH3 S/P ZH3 BASE-FOOT-L-ZH3 S/P ZH3 BASE-FOOT-ZH3 S/P ACER PART NO. 47.FR6V7
  • Acer Ferrari 1000 | Service Guide - Page 122

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.