Acer GD711 User Manual - Page 36
the projection direction.
View all Acer GD711 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
25 English 9 Image is too small • Adjust the zoom ring on the projector. or too large • Move the projector closer to or further from the screen. • Press "MENU" on the remote control. Go to "Image - -> Aspect Ratio" and try different settings. 10 Image has slanted • If possible, reposition the projector so that it is sides centered on the screen. • Select "Image --> Keystone" on the OSD and adjust the keystone direction. 11 Image is reversed • Select "Image --> Projection" on the OSD and adjust the projection direction. 12 Smart source shows No signal • Power off projector and power on again. 13 Image hangs up • Power off projector and power on again. when displaying video or photo in Smart source
25
English
9
Image is too small
or too large
•
Adjust the zoom ring on the projector.
•
Move the projector closer to or further from the
screen.
•
Press "MENU" on the remote control. Go to "Image -
-> Aspect Ratio" and try different settings.
10
Image has slanted
sides
•
If possible, reposition the projector so that it is
centered on the screen.
•
Select "Image --> Keystone" on the OSD and adjust
the keystone direction.
11
Image is reversed
•
Select "Image --> Projection" on the OSD and adjust
the projection direction.
12
Smart source
shows No signal
•
Power off projector and power on again.
13
Image hangs up
when displaying
video or photo in
Smart source
•
Power off projector and power on again.