Acer Veriton 7700G Veriton 3700G / 5700G / 7700G Service Guide - Page 46

The following table describes the parameters found in this menu. Parameter Description Options ACPI Suspend Type USB Device Wakeup From S3/S4 CPU Throttling Restore on AC Power Loss Wake-Up by LAN Wake-Up by PCI PME Resume by Alarm This item specifies the power saving modes for ACPI function. Options are: S1/POS: The S1 sleep mode is a low power state. In this state, no system context is lost (CPU or chipset) and hardware maintains all system context. S3/STR: The S3 sleep mode is a lower power state where the information of system configuration and open applications/files is saved to main memory that remains powered while most other hardware components turn off to save energy. The information stored in memory will be used to restore the system when a "wake up" event occurs. S1/POS S3/STR S3- suspend to RAM. Consumes less power, but some drivers may not support this state. S4 is Suspend to Disk. Enabled Disabled The item allows you to specify the CPU speed 75% (at percentage) to which it will slow down when 50% the CPU reaches the predetermined overheat 25% temperature. To setting the PC should power on or stand off when the power resume. Last State Power Off Power On These fields specify whether the system will be Disabled awakened from power saving modes when Enabled activity or input signal of the specified hardware peripheral or component is detected. These fields specify whether the system will be awakened from power saving modes when activity or input signal of the specified hardware peripheral or component is detected. Disabled Enabled Use this option to set the date and time for your Disabled computer to boot up. Enabled Date (of month) Alarm* - Indicate month when * Set Resume by Alarm to e system will boot up. Set it to 0 if you want to Enabled, then press to boot everyday. show the range of Date and Time Time (hh:mm:ss) Alarm* - Indicate the hour, Alarm. minute and second when system will boot up. NOTE: In ACPI mode: Valid-S5 and S4. In APM mode: Valid- shutdown Chapter 2 40