Acer Veriton 7700G Veriton 3700G / 5700G / 7700G Service Guide - Page 63
Standard Disassembly Procedure, Opening the Housing, Removing the ODD/FDD/SATA HDD
View all Acer Veriton 7700G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Standard Disassembly Procedure This section tells you how to disassemble the system when you need to perform system service. Please also refer to the disassembly video, if available. CAUTION: Before you proceed, make sure you have turned off the system and all peripherals connected to it. Opening the Housing This section tells you how to open the housing cover when you need to install additional components inside the system unit. CAUTION: Before you proceed, make sure that you have turned off the system and all peripherals connected to it. Removing the Housing 1. Remove the two screws holding the upper cover. 2. Slide the upper cover out and then gently pull it outward to detach it from the housing. Removing the ODD/FDD/SATA HDD 1. Lift up the FDD/ODD frame carefully. 2. Disconnect the FDD power cable and FDD cable from the ODD. 51 Chapter 3