Acer Veriton P330 F2 Smart Server Manager Best Practice Guide - Page 23

Smart Server Manager v1.2 - Best Practices Step2. Configure the SNMP service to make OS forward the RAID SNMP trap to SSM. Switch to Traps tab Key in public 3. Press Add to list button 4. Enter the IP address of SSM 5. Press Apply button In Linux, the idea is very much the same, but the SNMP trap function must be enabled in the terminal. The below script is outputted on Red Hat 5.3, for more detailed information please refer to the LSI MSM user guide. LSI MSM rpm will take care of the necessary modification needed in the snmpd.conf file for running the agent. Please refer to LSI documents. Or, you can refer to following steps to configure it by yourself. [SNMP service configuration example on RHEL6.0/5.6] 1. check if net-snmp is installed (RHEL6.0/RHEL5.6 default setting contains net-snmp) 1.1) xxxx> rpm -qa | grep net-snmp 1.2) make sure following net-snmp packages are isntalled 23