Adaptec 29160N User Guide - Page 1

512512final.qxd 12/17/99 2:05 PM Page 1 INTRODUCTION With the Adaptec SCSI Card 29160N PCI-Ultra 160 SCSI controller, you can connect up to 15 SCSI devices, such as hard disk drives, scanners, CD-ROM drives, and tape drives, to any IBM-compatible computer with PCI expansion slots. The following figure shows the SCSI connectors on the Adaptec SCSI Card 29160N. 68-pin Internal Ultra160-LVD Connector 50-pin Internal Fast/Ultra-SE Connector 50-pin External High-density Fast/Ultra-SE Connector Adaptec SCSI Card 29160N This installation guide provides instructions for • Installing the Adaptec SCSI Card 29160N • Setting up SCSI devices • Connecting SCSI devices • Installing driver software NOTE The Adaptec SCSI Card 29160N is designed for computer system original equipment manufacturers (OEMs). Use this product with the original computer system designed by the OEM; each OEM tailors their product specifications for their specific design needs. Adaptec assumes no responsibility for incompatibility or consequential damages if you use the Adaptec SCSI Card 29160N in another computer system. All product support and services are provided by the OEM. 1