Adaptec 29160N User Guide - Page 4

512512final.qxd 12/17/99 2:05 PM Page 4 STEP 4 Insert the Adaptec SCSI Card 29160N into the PCI expansion slot; press down firmly until it clicks into place, then replace the slot cover screw. Adaptec SCSI Card 29160N Installed in a PCI Expansion Slot SETTING UP SCSI DEVICES There are several things you need to do to your SCSI devices before you connect them to the Adaptec SCSI Card 29160N: • Set the SCSI IDs • Set the termination • Connect the power cables. Since setup can vary from device to device, always refer to the device's documentation for specific instructions. Below are some guidelines for setting SCSI IDs and termination on your devices. Refer to the Adaptec SCSI Card 29160N User's Reference for additional information on SCSI IDs and termination. NOTE If you refer to the device's documentation for installation instructions, be sure to return to this document to continue with installation of the software driver. 4