Adaptec 29160N User Guide - Page 9

512512final.qxd 12/17/99 2:05 PM Page 9 STEP 4 To connect a second Fast SCSI or Ultra Narrow SCSI device, plug the middle connector of the cable to the device. The device must not be terminated. Unterminated SCSI Device Terminated SCSI Device External Fast/Ultra-SE SCSI Connector (50-pin) Use the external Fast/Ultra-SE SCSI connector to connect your standard external SCSI devices that have 50-pin connectors. For each external device, you will need to obtain a 50-pin external SCSI cable. Follow these steps to connect your standard external devices: 50-pin High-density Fast/ Ultra-SE External Connector 50-pin External High Density SCSI Cable STEP 1 STEP 2 Connect one end of the external SCSI cable to the 50-pin highdensity external connector on the Adaptec SCSI Card 29160N. Connect the other end of the external SCSI cable to a SCSI connector on the back of the external SCSI device. If you are installing only one external device, terminate the device and skip to Step 4. 4 4 9