Adaptec AHA-2940UW User Guide - Page 17
Internal SCSI Devices
UPC - 760884128886
View all Adaptec AHA-2940UW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Installation Internal SCSI Devices 1 Install or enable terminators on the device that you plan to install at the end of the internal cable. Then remove or disable terminators on all remaining devices. On most internal SCSI devices, you control termination by setting a jumper or a switch, or by physically removing or installing a resistor module(s). Refer to the device's documentation to determine how to enable or disable termination on your particular device. This Device Terminated Figure 2-5. Installing Internal SCSI Devices 2 Install and mount each internal SCSI device inside your computer. (Refer to your computer and device documentation for instructions.) 2-5 Downloaded from www.Manualslib.com manuals search engine
2-5
Installation
Internal SCSI Devices
1
Install or enable terminators on the device that you plan to
install at the
end
of the internal cable. Then remove or disable
terminators on all remaining devices.
On most internal SCSI devices, you control termination by
setting a jumper or a switch, or by physically removing or
installing a resistor module(s). Refer to the device’s
documentation to determine how to enable or disable
termination on your particular device.
Figure 2-5. Installing Internal SCSI Devices
2
Install and mount each internal SCSI device inside your
computer. (Refer to your computer and device documentation
for instructions.)
This Device
Terminated
Downloaded from
www.Manualslib.com
manuals search engine