Adaptec AHA-2940UW User Guide - Page 28
Space, Enter - aha ultra
UPC - 760884128886
View all Adaptec AHA-2940UW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
AHA-2940UW/OF and AHA-2944UW/OF User's Guide environment of the other devices, the utility must make assumptions for configuration settings based on the active device. To select a device s Press ↑, ↓, or Space to scroll among the list of devices. s When the device you want to configure appears at the Select Host Adapter to Configure prompt, press Enter. The top portion of the configuration screen (Host Adapter SCSI ID and above) for the selected device appears. The remaining options are displayed line-by-line as you set each parameter. Figure 3-3 shows the complete configuration screen for the selected device. AHA-294XU/UW/D - Bus 1 - Device 4 { to select settings { to accept setting {!=select default setting {@=select saved setting {#=select previous setting to select device } to abort configuration } F6=restore all default settings } F7=restore all saved settings } F8=restore all previous settings } Host Adapter SCSI ID 7 ] (default) SCSI Parity Checking ENABLED ] (default) Support for Ultra SCSI Speed ENABLED ] (default) Host Adapter SCSI Termination AUTOMATIC ] (default) Initiate Sync Negotiation -- SCSI ID [ 0] [ YES ] (default) Maximum Sync Transfer Rate - SCSI ID [ 0] [ 40.0 ] (default) Enable Disconnection ------- SCSI ID [ 0] [ YES ] (default) Initiate Wide Negotiation -- SCSI ID [ 0] [ YES ] (default) Reset SCSI Bus at Host Adapter Initialization [ YES ] (default) *Do you wish to save your settings? .... [ YES ] ..settings saved Do you wish to reboot the system? ..... [ NO ] Do you wish to reinitialize the device? [ YES ] . device reinitialized Figure 3-3. Device Configuration Screen 3-4 Downloaded from www.Manualslib.com manuals search engine