Airlink AGSW1600V2 Quick Installation Guide - Page 9
Connecting the Switch
 |
View all Airlink AGSW1600V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Section 3 Connecting the Switch This section describes how to connect the Switch to your 10/100/1000Mbps Ethernet network. Your network device (i.e. computer, switch, IP Camera, VoIP) can be connected to any port of the Switch via a two-pair UTP Category 5 Cable. If the LED indicators do not light up after making a proper connection, check your network device, the cable, the Switch conditions and connections. 8
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
 |
 |
8
Connecting the Switch
This section describes how to connect the Switch to your
10/100/1000Mbps Ethernet network.
Your network device (i.e. computer, switch, IP Camera, VoIP)
can be connected to any port of the Switch via a two-pair
UTP Category 5 Cable. If the LED indicators do not light up
after making a proper connection, check your network device,
the cable, the Switch conditions and connections.
Section 3