Airlink AIC250W User Manual - Page 18
Configuring Wireless Settings - router setup
View all Airlink AIC250W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
7. Configuring Wireless Settings 7.1 Infrastructure Mode Note: The following instructions describe how to setup the IP Camera in wireless Infrastructure mode. Use this mode if you are connecting wirelessly through a wireless router / access point. You should use a wired connection to configure the following wireless settings before unplugging the network cable from the IP Camera. Step 1 At the Setup Wizard, select the desired Camera from the list and click on the Web Config button. Step 2 Click on System Administration to enter the Web Configuration Utility. 18
18
7. Configuring Wireless Settings
7.1 Infrastructure Mode
Note:
The following instructions describe how to setup the IP Camera in wireless
Infrastructure mode. Use this mode if you are connecting wirelessly through a wireless
router / access point. You should use a wired connection to configure the following
wireless settings before unplugging the network cable from the IP Camera.
Step 1
At the Setup Wizard, select the desired Camera from the list and click on the
Web Config
button.
Step 2
Click on
System Administration
to enter the Web Configuration Utility.