Airlink AIC250W User Manual - Page 22
Ad-Hoc Mode
View all Airlink AIC250W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
7.2 Ad-Hoc Mode If you want to bypass your wireless router / access point and connect directly to the Wireless Camera, follow the steps below. You should use a wired connection to configure the following wireless settings before unplugging the network cable from the Camera Caution: Your wireless computer may lose Internet connection if you set it to Ad-Hoc mode. Step 1 Go to Configuration, Wireless, and set the Connection Mode to Ad-Hoc. 22
22
7.2 Ad-Hoc Mode
If you want to bypass your wireless router / access point and connect directly to the
Wireless Camera, follow the steps below. You should use a wired connection to
configure the following wireless settings before unplugging the network cable from the
Camera
Caution:
Your wireless computer may lose Internet connection if you set it to Ad-Hoc
mode.
Step 1
Go to
Configuration
,
Wireless
, and set the
Connection Mode
to
Ad-Hoc
.