Airlink AMPS240W Quick Installation Guide
Airlink AMPS240W Manual
 |
View all Airlink AMPS240W manuals
Add to My Manuals
Save this manual to your list of manuals |
Airlink AMPS240W manual content summary:
- Airlink AMPS240W | Quick Installation Guide - Page 1
Ver. 1A Quick Installation Guide Wireless USB 2.0 1-Port Multi-Functional Printer Server Model # AMPS240W Package Content: • 1-Port Wireless MFP Server • Driver & Utility CD • Quick Installation Guide Section 1 This Quick Installation Guide only provides basic instructions. For detailed information - Airlink AMPS240W | Quick Installation Guide - Page 2
cable coming from your printer into the USB port on the printer server. Step 4 Turn on the printer. Once the printer is powered on, connect the print server's power adapter to an electrical outlet. Section 2 Installing the PS Software Note: The PS Software must be installed on all computers you plan - Airlink AMPS240W | Quick Installation Guide - Page 3
Note: If the autorun window does not appear automatically, go to Start -> Run and type D:\Utility\Setup.exe (where D is the letter of your CD-ROM drive) and click OK. Step 2 Select your setup language and click OK. - Airlink AMPS240W | Quick Installation Guide - Page 4
Step 3 Click Next at the welcome screen. Step 4 Click Next at the Choose Destination Location screen. - Airlink AMPS240W | Quick Installation Guide - Page 5
Step 5 Click Next at the Select Program Folder. Step 6 Once the installation is complete, make sure that the Launch PS-Link box is checked and click Finish. - Airlink AMPS240W | Quick Installation Guide - Page 6
computer. Step 1 Click the Discover button and your printer should show up under Server Name. If your print server does not show up, check all power and network cable connections to the printer. You may also need to disable any software firewalls you have on your computer. Step 2 Once the printer - Airlink AMPS240W | Quick Installation Guide - Page 7
Step 3 A password box will appear. The default password is admin. Enter it and click OK. Step 4 Click Next at the welcome screen. - Airlink AMPS240W | Quick Installation Guide - Page 8
Next after making the desired changes. If you do not have a specific Server Name, Port Name, or Password that you would like to use, click Next to accept the default settings. Step 6 At the Wireless screen you can input the wireless settings for your network. If you have a router, you will want to - Airlink AMPS240W | Quick Installation Guide - Page 9
from your router or router manufacturer and enter them here. Afterwards, click Next. For WEP encryption, select WEP and enter your settings into the boxes below. For WPA-PSK, Select WPA-PSK and enter your Pre-Shared Key into the box. Please note that the print server only supports TKIP and does not - Airlink AMPS240W | Quick Installation Guide - Page 10
you would like to assign to the print server, select Manually Assign and enter your custom settings. Otherwise, select DHCP Assign Automatically and click Next. Step 9 If your network uses a workgroup name other than WORKGROUP, you can enter it here, or accept the default settings, and click Next. - Airlink AMPS240W | Quick Installation Guide - Page 11
you have specific AppleTalk settings, you can enter them here or accept the default settings, and click Next. Step 11 Click Save to save the changes to your print server. If you plan to use the print server wirelessly, you can now disconnect the Ethernet cable between the print server and the router - Airlink AMPS240W | Quick Installation Guide - Page 12
connections to the printer. You may also need to disable any software firewalls you have on your computer. If you are using the print server wirelessly, please refer to Section 5 for wireless troubleshooting steps. Step 3 Select your print server from the Server Name box and click the Link button. - Airlink AMPS240W | Quick Installation Guide - Page 13
see notices appearing in the bottom right-hand corner of your screen while Windows configures the printer. Step 5 Once you see a notice that says , go to Start -> Control Panel and double click on Printers and Faxes (Vista users: Click on Printers instead of Printers and Faxes) Step 6 In Printers and - Airlink AMPS240W | Quick Installation Guide - Page 14
Congratulations, the configuration is now complete. Remember to repeat all steps in Section 4 on each of the computers you plan to use with the print server. - Airlink AMPS240W | Quick Installation Guide - Page 15
stable connection. To check if the print server is connected wirelessly, disconnect the networking cable from the print server and open the PS-Link software, then click on Discover. If your print server shows up, the wireless connection is working. For instructions on changing channels, refer to the - Airlink AMPS240W | Quick Installation Guide - Page 16
.com Toll Free: 1-888-746-3238 Website: www.airlink101.com *Printer server may not support all printers. Go to the AirLink101 website to view the printer compatibility list. *Theoretical maximum wireless signal rate based on IEEE standard 802.11g specifications. Actual data throughput will
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
Quick Installation Guide
Wireless USB 2.0 1-Port Multi-Functional Printer Server
Model # AMPS240W
This Quick Installation Guide only provides basic instructions.
For detailed
information on using this product, please refer to the User’s Manual on the
supplied CD.
Connecting the Printer Server
WARNING:
Only a USB printer may be connected to the USB port of the
Printer Server.
Connecting any other USB device to the Printer Server may
damage the Printer Server.
Note:
Before connecting the hardware you must install the printer on each
computer you plan to use with the printer.
Make sure that you are able to print,
scan, and fax from each with your multi-functional printer directly connected to
your computer(s).
Section 1
Ver. 1A
Package Content:
•
1-Port Wireless MFP
Server
•
Driver & Utility CD
•
Quick Installation Guide