Airlink AR315W Manual - Page 18
Step 5, Dynamic IP Address, Specified IP Address, Step 6, Test Internet Connection, Finish, Step 7,
View all Airlink AR315W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Step 5 Choose your IP Address assignment and click Next. For most users, you can use the default settings (Dynamic IP Address). If you are using a Static IP assigned by your ISP, select Specified IP Address and enter the applicable values. Step 6 Make sure the Test Internet Connection box is checked and click Finish then OK to begin the Internet Connection Test. Step 7 Verify that the Internet Connection Test is successful and click Close. If the test did not pass, please refer to Appendix A Troubleshooting. 14
14
Step 5
Choose your IP Address assignment and click
Next
. For most users, you can use the
default settings (
Dynamic IP Address
). If you are using a Static IP assigned by your ISP,
select
Specified IP Address
and enter the applicable values.
Step 6
Make sure the
Test Internet Connection
box is checked and click
Finish
then
OK
to
begin the Internet Connection Test.
Step 7
Verify that the Internet Connection Test is successful and click
Close
. If the test did not
pass, please refer to
Appendix A Troubleshooting
.