Airlink AR315W Manual - Page 23
Options, Wireless Router, Buttons - security
View all Airlink AR315W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Options Mode Select the desired mode: • g & b - Both 802.11.g and 802.11b Wireless stations will be able to use the Wireless Router. • g only - Only 802.11g Wireless stations can use the Wireless Router. • b only - Only 802.11b connections are available. 802.11g Wireless Stations will only be able to use the Wireless Router if they are fully backward compatible with the 802.11b standard. Channel No. This selection determines which operating frequency will be used. The channel list changes according to the selected region. Select the desired channel. Adjacent Wireless Routers should use different channels to avoid interference. Broadcast SSID Wireless Security If Enabled, the SSID will broadcast its name to all Wireless Stations. Stations that have no SSID (or a "null" value) can then adopt the correct SSID for connections to this Wireless Router. Displays the current security setting Configure Click this button to access the WEP and WPA settings. Wireless Router Enable Access • Point • • Allow LAN • access by ... • Allow Internet • access by ... • If Enabled, wireless stations will be able to locate and use this Wireless Router. If Disabled, the wireless interface is disabled, and will neither transmit nor receive wireless data. The Wireless (WLAN) LED on the front panel will remain OFF if the Wireless Router is disabled. All Wireless Stations - All wireless stations can use the Wireless Router to access your LAN. Selected Wireless stations only - Only selected wireless stations can access your LAN. To select the required wireless stations, click the "Select Stations" button. All Wireless Stations - All wireless stations can use the Wireless Router to access the Internet. Selected Wireless stations only - Only selected wireless stations can use the Wireless Router to access the Internet. To select the required wireless stations, click the "Select Stations" button. Buttons Configure Click this button to view the WEP and WPA sub-screen. Select Stations Click this button to select the required PCs. Save Save the data on screen. Cancel The "Cancel" button will discard any data you have entered since the last "Save" operation. 19