Airlink AR315W Manual - Page 66
Virtual Servers Screen
View all Airlink AR315W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Virtual Servers Screen The Virtual Servers screen is reached by the Virtual Servers link on the Advanced screen. An example screen is shown below. This screen lists a number of pre-defined Servers, and allows you to define your own Servers. Details of the selected Server are shown in the "Properties" area. Data - Virtual Servers Screen Servers Servers Properties This lists a number of pre-defined Servers, plus any Servers you have defined. Details of the selected Server are shown in the "Properties" area. Enable PC (Server) Protocol Internal Port No. External Port No. Buttons Use this to Enable or Disable support for this Server, as required. • If Enabled, any incoming connections will be forwarded to the selected PC. • If Disabled, any incoming connection attempts will be blocked. Select the PC for this Server. The PC must be running the appropriate Server software. Select the protocol (TCP or UDP) used by the Server. Enter the port number that the Server software is configured to use. The port number used by Internet users when connecting to the Server. This is normally the same as the Internal Port Number. If it is different, this device will perform a "mapping" or "translation" function, allowing the server to use one port address, while clients use a different port address. Defaults This will delete any Servers you have defined, and set the predefined Servers to use their default port numbers. 62