Airlink AR570W Quick Installation Guide - Page 3

Step 6 Make sure POWER, WAN, WLAN, and the LAN port that the computer is connected to are lit. If not, try the above steps again. LED Indicators: LED POWER Light Status On On WLAN Off Flashing WAN LNK/ACT On Off Flashing LAN 1-4 LNK/ACT On Off Flashing Description Router is powered on. WPS setup is in progress. Wireless network is switched off. Wireless network is ready and WPS setup is not in progress. WAN port is connected. WAN port is not connected. WAN port is transferring or receiving data. LAN port is connected. LAN port is not connected. LAN port is transferring or receiving data. Step 7 Enter the Router's password to log in to the Router. The default password is "admin". It is recommended to change the router's password to protect it from being accessed by other users. If you do not wish to change the current password, you can leave New Password and Confirm New Password blank. Click Next. Step 8 Verify the Internet Connection Type the wizard detected. If it is not correct, please configure it manually. Click Next. Note: If you are not sure which Internet Connection Type you use, please contact your Internet Service Provider for this information.