Airlink AWLH3028V2 User Manual - Page 36

Troubleshooting - problems cant see wireless network

Get Airlink AWLH3028V2 PDF manuals and user guides View all Airlink AWLH3028V2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

5 Troubleshooting 1. If you cannot open the Wireless LAN Monitor utility, make sure that the PCI adapter is inserted firmly into the PCI slot. 2. If you cannot connect to the wireless router, you may want to double check the wireless security settings on the router. The network key you entered in Step 3.3 must match with the settings on the wireless router. 3. If you are experiencing problems with the connection such as low signal strength, slow connection speed, or unstable wireless connection, you can try to tune your router's signal by changing the channels on the router and/or by adjusting the direction of the antenna(s). You do not need to change the channel on the Adapter; it will automatically pick up the new channel after you reboot the router. Your router has 11 different channels to choose from. Keep going through the channels until you find one that gives you a stable connection. For instructions on changing channels, refer to the documentation that comes with the router. 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
36
5 Troubleshooting
1. If you cannot open the Wireless LAN Monitor utility, make sure that the PCI adapter is
inserted firmly into the PCI slot.
2. If you cannot connect to the wireless router, you may want to double check the
wireless security settings on the router. The network key you entered in Step 3.3 must
match with the settings on the wireless router.
3. If you are experiencing problems with the connection such as low signal strength,
slow connection speed, or unstable wireless connection, you can try to tune your
router’s signal by changing the channels on the router and/or by adjusting the direction
of the antenna(s). You do not need to change the channel on the Adapter; it will
automatically pick up the new channel after you reboot the router. Your router has 11
different channels to choose from. Keep going through the channels until you find one
that gives you a stable connection. For instructions on changing channels, refer to the
documentation that comes with the router.