Alpine 7893 Owners Manual - Page 15

Titling Discs/Stations It is possible to title your favorite CD's or radio stations. You cannot input titles on MP3 discs (Except when a changer is connected). 1 Press the TITLE button and select the title display mode. For details, see "Displaying the Title/Text" (page 12). 2 Press and hold the TITLE button for at least 3 seconds. The first character will blink. CDA-7995 only: Press the BAND button to select the characters/ symbols. → Upper case → Lower case → Numeral/Symbol 3 Turn the Rotary encoder to select the desired letter/ numeral/symbol available for naming. 4 Press the Rotary encoder to store the first character. The first character will stop blinking and the display will automatically advance to the next character. When that character begins to blink, you may choose the next letter or symbol of your title. 5 Repeat the steps 3 and 4 above to complete the titling. Pressing the Rotary encoder after entering the 8th character, automatically stores the title into memory. When entering a title of less than 8 characters (for example, 3 character title): After entering 3 characters to complete your title, the 4th character space will be blinking. Go to step 6 to complete the title. 6 Press the TITLE button to record the title. NOTES • You can enter 24 radio station titles and 18 CD titles on this unit. If you try to store beyond the limit, the display will show "FULL DATA." At this point, no more titles can be stored. • The CD Changer title length or memory capacity varies depending upon the model being used. • To input a new title, one of the previously inputted titles must first be deleted. • When you want to erase a title, enter the " ", " " (CDA7995 only) symbol into all spaces. • The operations described in steps 3 to 5 must be made within 10 seconds. The input mode will be cancelled if no action is taken for over 10 seconds. • Removing power from the unit may delete these titles. Use caution when manipulating the power cord. Erasing Disc Title/Station Title 1 Press the TITLE button to select the titling mode. Then, press and hold for at least 3 seconds. 2 Press and hold the -/J button for at least 2 seconds to activate the title scanning mode. The title in the display will blink. 3 Press the g DN or f UP button repeatedly until the title you want to erase is displayed. 4 Press and hold the -/J button for at least 2 seconds to erase the title displayed. 5 Press the TITLE button to cancel the title erasing mode. NOTE You cannot erase CD-TEXT. 13-EN