Alpine CDE-SXM145BT User Manual - Page 26

Notes • You can perform this operation only when a Voice recognition compatible mobile phone is connected. If the mobile phone is not compatible with the Voice recognition, "NO SUPPORT" is displayed for 2 seconds. • The Voice recognition function performance depends on the recognition range of the mobile phone and mounting location of the microphone. Please pay attention when the microphone is mounted. • Voice recognition operation depends on the function of the mobile phone. For details, refer to the Owner's Manual of the mobile phone. • If a called person that you say is not found, "NO CALL" is displayed for 2 seconds. • Please obey all local traffic laws while using this function. Calling Call History is recorded for the last dialed/received/missed calls. There are various ways of making calls based on the "Calling". The following steps 1 to 5 are common to the various ways of making these calls. For details, refer to each individual category for making calls. 1 Press f. The outgoing method list is displayed. 2 Turn the Rotary encoder to select the outgoing mode. Setting contents: DIALED / RECEIVED / MISSED / PHONE BOOK DIALED: Dialed history RECEIVED: Received history MISSED: Missed incoming history PHONE BOOK: Mobile phone book 3 Press ENTER. The outgoing mode is activated, and each mode list is displayed. Note • It may take some time for the list to be displayed, and also directly after connection, the list may not be brought up to date. 4 Turn the Rotary encoder to select a name or a telephone number from the list. Note • You can use Phone book alphabet search function to search a name or number from Phone Book. For details, refer to "Phone book alphabet search function" on page 26. 5 Press ENTER. The selected telephone will be called. If one name has several numbers registered in the telephone book, press ENTER after selecting the name*, then turn the Rotary encoder to choose the desired number and press ENTER, the telephone will be called. Depending on the connected mobile phone, this function may not be performed. * If the name cannot be recognised, default number will be displayed. Notes • Press r to return to the previous mode. • If no operation is performed for 60 seconds, the unit will return to normal mode automatically. • If there is no content in DIALED/RECEIVED/MISSED/PHONE BOOK list will be displayed for 2 seconds. • If you place a call directly from the paired mobile phone, the phone number is not displayed, you cannot redial from the unit in this case. Redialing a Number In Outgoing History Previously dialed telephone numbers (Maximum 20 items) are stored in dialed calls history. You can redial a number by searching from dialed calls history.  Setting item: DIALED Dialing a Number In Incoming History Telephone numbers from received calls (Maximum 20 items) are stored in the Received List. You can redial these numbers by searching here.  Setting item: RECEIVED Dialing a Number In Incoming Missed Call History Telephone numbers for received calls that are missed (Maximum 20 items), are stored in the Missed List. You can redial these numbers by searching here.  Setting item: MISSED Dialing a Number In The Phone Book Up to 1,000 names (at most 3 telephone numbers for each name) are downloadable from a mobile phone. Dial a call by selecting a person from the phone book list.  Setting item: PHONE BOOK Notes • The order of the list display depends on the setting of "PB ORDER" (refer to "Changing the Phone book List Order" on page 24). • If the call history or phone book of the mobile phone is added or deleted while it is connected to the unit, the list displayed on the unit may not be brought up to date. If it is not updated, you cannot correctly place a call. • You can display the information of a number stored in phone book by pressing k. Each press changes the display as Name  Telephone NO.  Telephone label*  Name If the information cannot be obtained, "NO NAME", "NO NUMBER" or "NO LABEL" will display. * The telephone label of a number depends on the number information stored in Phone book of the mobile phone, which includes 4 types-MOBILE, HOME, OFFICE, and OTHER. Phone book alphabet search function You can select the first three letters to search for a desired name in phone book list by using the Phone book alphabet search function. For example: Searching a name "Michael James" The following example explains how the search is performed. Depending on the setting in PB ORDER (refer to "Changing the Phone book List Order" on page 24), the phone book is listed in first name or last name order. Please search for the first name or last name according to the setting. 1 Press BAND/ABC SEARCH while in the phone book list, the phone book alphabet search mode is activated. The letter selection list is displayed. 2 Turn the Rotary encoder to select the first letter (e.g. M), and then press . The letter selection list is displayed. 26-EN