Alpine DVR-C310R Owners Manual - Page 16

Installing the product 2.1.3 Connecting the power cable with the car charger When the engine and electrical accessories are turned off, connect the car charger. Connect the cigar socket power cable to the product's ➊1 DC-IN power connector and insert the cigar jack into the vehicle's power socket. The location and specifications of the power socket may differ by vehicle make and model. ➋2 • Use an authentic cigar socket power cable. If you use another manufacturer's cable, the product may be damaged or electrical fire or electrocution may result due to the voltage difference. • Do not cut or modify the power cable yourself. Doing so may damage the product or the vehicle. • For safe driving, arrange the cables to prevent the driver's vision from being obstructed or interfering with driving. 2.2 Installing the rear camera Refer to the following instructions to properly install the rear camera. 2.2.1 Selecting an installation location Select a location on the rear windshield where there is no defrost grid wire and the camera can record the entire rear view. • For vehicles with a sunshade attached to the rear windshield, select a location where using the sunshade will not interfere with camera operation. • The adhesive part of the rear camera should not touch the defrost grid. 16