Alpine DVR-C310R Owners Manual - Page 21

Using recording features 3.3 Using the continuous recording feature Connect the power cable to the product's DC-IN power port and then turn on the vehicle's electrical accessories or start the engine. The status LED and the voice guide are turned on, and the continuous recording starts. During continuous recording, the product operates as follows. Mode Continuous recording Operation description During driving, videos are recorded in 1 minute segments and stored in the "cont_rec" folder. STATUS LED (light on) Incident continuous recording* When an impact to the vehicle is detected, a video is recorded for 20 seconds, from 10 seconds before the detection to 10 seconds after the detection, and stored in the "evt_rec" folder. (flickers) * When an impact to the vehicle is detected during continuous recording, incident continuous recording starts with a buzzer sound. • The video recording does not begin until the product is completely booted up and the GPS signal is received. After the booting up is finished you may begin operating the vehicle. • When incident continuous recording starts, the buzzer sounds as a notification. • To enable recording, insert a memory card into the product. 3.4 Recording manually You can record a scene you want to capture while driving and store it as a separate file. To start manual recording, press the REC button. Then, manual recording will start with the voice guide. During manual recording, the product operates as follows. Mode Manual recording Operation description When you press the REC button, a video will be recorded for 1 minute, from 10 seconds before to 50 seconds after pressing the button, and stored in the "manual_rec" folder. STATUS LED (flickers) 21