Alpine DVR-C310R Owners Manual - Page 19
Installing the external GPS receiver
View all Alpine DVR-C310R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installing the product 2.3 Installing the external GPS receiver To activate the ADAS feature or record driving information (the speed and location), follow the instructions and install the external GPS receiver on the upper part of the front windshield. Install the external GPS receiver near the product, taking its cable length into account. 1 Remove the film from the back of the external GPS receiver. 2 Attach the external GPS receiver's adhesive surface to the upper part of the front windshield and press the adhesive part firmly to secure it. Before installation, make sure the external GPS receiver's cable length is sufficient and check the cable routing path. 3 Connect the external GPS receiver to the product's GPS connector. Check the GPS connector location again before connecting the GPS receiver. If you connect the external GPS receiver to the DC-IN power connector, the pins inside the port may be damaged. 4 Turn on the ACC or starts the engine to check that the product is powered on. After the product is powered on, the Status LED and the voice guide are turned on. The product is powered on when electric accessories are turned on or the engine starts. 19