Alpine INE-W960 Owner's Manual (english) - Page 31

Format Settings The character code to be used for tag text information displayed on the screen can be selected from 7 character codes. Setting item: Format Setting contents: Latin-1 / Latin-9 (Initial setting) / Russian / Chinese / Thai / Arabic / Hebrew Latin-1: ISO 8859-1 Latin-9: ISO 8859-15 Russian: ISO 8859-5 Chinese: GB18030 Thai: CP874 Arabic: CP1256 Hebrew: CP1255 Setting the Menu Language The Setup menu, feedback information, etc. for this unit can be changed to appear in the selected language. Setting item: Language Setting contents: English / Spanish / French / Italian / German / Portuguese / Swedish / Finnish / Russian / Dutch / Norwegian / Thai / Arabic / Chinese / Czech / Danish / Greek / Hungarian / Polish / Slovak / Turkish / Hebrew / Bahasa Indonesia / Bahasa Malay • Touch [OK] to confirm the language and display the screen in the specified language. Clock Display Setting [Clock Display] is selected on the General setup menu in step 3. Refer to "General Setup Operation" (page 30). The clock indication on the monitor display is turned on or off respectively. Setting item: Clock Display Setting contents: Off / Type A (Initial setting) / Type B Off: Not displayed Type A: The clock indication is displayed in the upper right corner of the screen when the Top banner fades out. Type B: The clock indication is always displayed in the bottom right corner of the screen. Setting Top banner and Bottom banner Display [Top/Bottom Banner Fade Out] is selected on the General setup menu in step 3. Refer to "General Setup Operation" (page 30). You can configure the display setting for the Top banner and Bottom banner for the audio/visual source. Setting item: Top/Bottom Banner Fade Out Setting contents: Off (Initial setting) / Top / Top and Bottom Off: Always displayed Top: Top banner will fade out after 5 seconds if no operations are performed. Top and Bottom: Top banner and Bottom banner will fade out after 5 seconds if no operations are performed. Screen/LED Customize Touch [Screen/LED Customize] on the General setup menu in step 3. Refer to "General Setup Operation" (page 30). Setting the Brightness of the Backlighting The illumination control adjusts the brightness of the backlighting based on the car ambient lighting for easier viewing. Setting item: Dimmer Setting contents: Auto (Initial setting) / On / Off Auto: Adjust the brightness of the background illumination of the monitor automatically to the brightness of the car interior. On: Keep the background illumination of the monitor dark. Off: Deactivate Auto Dimmer mode to keep the background illumination of the monitor bright. • When "Auto" or "On" is set, the setting is also applied for the button lighting in "Adjusting the Dimmer of Button Lighting at Night" (page 32). Adjusting the Minimum Level of Backlight You can adjust the brightness of the backlight. This function could be used, for instance, to change the screen brightness while traveling at night. Setting item: Screen Dimmer Level Setting content: -15 to +15 (Initial setting: 0) You can adjust the level between MIN (-15) and MAX (+15). When it reaches the minimum or maximum point, the display shows "MIN" or "MAX" respectively. 31-EN