Alpine INE-W960 Owner's Manual (english) - Page 34
Installation Setup, Demonstration Setup, Setting Demo mode to Off/On, Sound Setup
View all Alpine INE-W960 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Installation Setup [Installation] is selected on the General setup menu in step 3. See "General Setup Operation" (page 30). Setting item: Installation The Installation check screen is displayed. Demonstration Setup [Demo mode] is selected on the General setup menu in step 3. Refer to "General Setup Operation" (page 30). Setting Demo mode to Off/On This unit has a Demonstration feature for the display. When you install and use the unit for the first time, the unit will enter demo mode automatically. To quit demo mode, set Demo mode to Off. Setting item: Demo mode Setting contents: Off / On (Initial setting) • If you perform an operation during the Demo mode, the demonstration is temporarily stopped. Sound Setup Sound Setup Operation To display the Sound Setup Menu screen: Your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below. 1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2 Release the parking brake (for your safety, operate while depressing the foot brake pedal). 3 Engage the parking brake again. • For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the Sound mode operation has been released. Engaging the parking brake can reactivate the Sound Setup Menu, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of "To display the Sound mode screen." Each time the ignition is turned OFF, perform the procedure of "To display the Sound mode screen." The following steps 1 to 5 are common operations to each "Setting item" of Sound Setup. Refer to each section for details. 1 Touch [Setup] icon of Top banner. The Setup main screen is displayed. 2 Touch [Sound]. The Sound Menu screen appears. 3 Select the desired item. 34-EN Setting items: Car Specific Sound Setup* / Media Xpander* / EQ Presets* / Quick Sound / TCR (Time Correction) / X-Over* / Parametric EQ* / Other / Defeat* * When BASS ENGINE SQ of Quick Sound Setup is set to "On," the message "This function cannot be used now. Please check Sound APP connection and BASS ENGINE SQ settings." will be displayed. This setting cannot be selected.