Alpine PMD-B200 Owners Manual - Page 8
Installation
UPC - 793276100160
View all Alpine PMD-B200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
INSTALLATION ■ How to Mount Blackbird WARNING Improper installation may make the navigation system fall out from the cradle while driving. Please make sure all locks and knobs are turned tight. Do not install the navigation while driving. 3 4 Note: The cradle consists of 2 separate parts that must be assembled before mounting. 1 Find a spot suitable for the navigation system. Ensure that both the suction cup and windshield area are clean and free of dirt and grease before attaching it. Press the suction cup mount against the windshield. Turn the knob to activate the vacuum to lock the position. 2 Turn the knob counterclockwise to adjust up/down position. Then turn clockwise to set the position. 2 3 Turn the knob clockwise to adjust right/left position. Then turn counter clockwise to set the position. DEVICE SHOULD NOT BE INSTALLED SO THAT IT OBSTRUCTS THE DRIVER'S VIEW. 4 Slide the navigation system into the cradle until you hear a click sound. 5 Plug the cigarette lighter charger into the cigarette lighter socket. CAUTION Remove the navigation system when you are away from the vehicle to prevent theft. ■ How to Remove the Navigation System from the Cradle 2 1 1 Press and hold the eject button on the cradle. 2 Grasp the navigation system behind the antenna and remove by sliding up and out of the cradle. NOTE: Local regulations may prohibit the placement of any object on windows or the dash. Refer to your authorized Alpine dealer for other installation options. 8