Alpine X009-U Navigation Owner's Manual (english) - Page 58
Off-road navigation
View all Alpine X009-U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
4 Off-road navigation When first started, Alpine INE-W957HD/X008U/X009 calculates routes using the road network of the high quality vector maps provided with the product. You can switch the application to off-road mode in Navigation settings in one of the following ways: • From the Navigation menu, tap , and then . • From the Map screen, tap The link ed image cannot be display ed. The file may hav e been mov ed, renamed, or deleted. Verify that the link points to the correct file and location. , and then . Most of the procedures described for on-road navigation also apply to off-road navigation. However, there are some that are not available in this navigation mode (for example you cannot open the itinerary as you have no manoeuvres just route points and straight lines between them). 4.1 Selecting the destination of the route Selecting the start point or a destination (waypoint or final destination) is the same as described at on-road navigation. The only difference is that route points are linked to form a route with straight lines regardless of the road network and traffic regulations. 4.2 Navigating in off-road mode The real difference between the on-road and off-road modes is the navigation itself. When you are on the Map screen with an off-road route: • your position and heading is not aligned with the nearest road and • there is no turn by turn navigation just a recommended direction. You see a straight line drawn between your current position and the next destination to reach. The Turn Preview field in the top left corner shows an arrow with your bearing and the distance of the next destination. When you reach a waypoint, the straight line will show the direction to the next destination. When you reach the final destination, navigation ends. 58