Asko D5536XXLFI Installation instructions EN - Page 7
Step 1. Fitting The Dishwasher In Place
View all Asko D5536XXLFI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
STEP 1. FITTING THE DISHWASHER IN PLACE 1. Be sure to remove the transport protection for the door when unpacking the dishwasher. 2x 2. Attach the light shielding film (packed in the document bag) to the underside of the countertop above the touch buttons. (Only certain models). 1 ! The light shielding film ensures optimal button functionality. NOTE: The surface on which the protective film is to be attached must be clean and dry. 3. Attach the supplied door sealing (only certain models). 1 This strip is an essential part of the Turbo Dry Express system and must be installed to ensure an optimum seal between the dishwasher tank 2 2 and door. 4. Start by measuring the height from the floor to the bottom edge of the counter top. Measure the height from the floor to the top edge of the dishwasher. 5. Loosen the lock nuts on the dishwasher's steel feet using a 5/8 inch (16 mm) open-ended wrench. Screw the lock nuts down as close to the floor as possible. 5/8" (16 mm) CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM 7