Asko T208CW Installation Instructions English - Page 5
How to stack a dryer onto the washing machine ASKO
View all Asko T208CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
How to stack a dryer onto the washing machine (ASKO): There is a cardboard box in the dryer drum, containing the vacuum feet and the tipping guard. AB 1 The tipping guard consists of two metal parts (A + B). Use two screws to attach the A part to the back of the dryer. 2 Undo the screw on the back side of the washing machine. 1 2 3 1 2 1 3 A B 2 5 mm 3 Use the screw to attach the tipping guard (B part) to the back of the washing machine. 4 Level the washing machine so that it is stable. 1. Level the washing machine by rotating the adjustable feet using a No. 32 (1.26") spanner. The feet allow levelling by +/- 1 cm (0.39"). 2. After adjusting the height of the feet, firmly tighten the jam nuts using a spanner No 17 (0.67"), by turning them towards the bottom of the washing machine . 3. Tighten the jam nuts. 5 Set the dryer feet: 1. Tighten the front two feet all the way in. 2. Undo the back feet by 3.5 turns or 5 mm (0.2"); then, fasten the jam nuts towards the bottom of the appliance . 6 Place the dryer onto the washing machine: 1. Lift the front part of the dryer by 5 cm (2") to 10 cm (4"). 2. Attach the vacuum feet onto the front feet of the dryer. 3. Push the dryer into the tipping guard (so that the B part is inserted into the A part) and release it (See figure on previous page). Make sure the tipping guard is "locked"! Customer Care Center, 1-800-898-1879, www.askona.com 5