Asko T702 User manual Use & Care Guide Asko T702 EN - Page 27

Reversing the door Reversing the door The tumble dryer comes with the door hinged on the left. However, it is possible to change the door to be hinged on the right. Follow these instructions: 1. Remove the lower front plate and undo the three screws holding the hinge attachment. 5. Next you must move the plastic plugs on the upper and lower edges of the door. Use a flat screwdriver. 6. Unscrew the two screws on the sides of the door by about a quarter inch to allow the door magnet and cover washer on the inside of the door to be removed. 2. Angle the lower edge of the door out to the left while turning the hinge attachment as indicated by the arrows. Hinge attachment 3. Move the hinge pin. To hinge the door on the right, the hinge attachment must be turned upside down. 7. Then remove the door magnet (1) and cover washer (2). 1 2 Hinge pin 4. Then move the hinge pin in the panel's lower edge. 8. Insert the door magnet in place of the cover washer. Customer Care Center 27 1-800-898-1879 www.askousa.com