Asko T711 User manual Use & Care Guide EN - Page 19

ENGLISH The table below lists the options available with each dry program. These options can be temporary or permanent, depending on your preference. Refer to the "Programming Instructions" setting below for detailed instructions on how to navigate the program menu and make temporary and permanent changes to the programs. OPTIONS AVAILABLE WITH EACH PROGRAM Program Extra Dry Dry Normal Dry Iron Dry Air fluff (2) Timed dry (2) Dry Temp Normal or Low Normal or Low Normal or Low Normal or Low n/a Normal or Low Cooling Time (1) Normal or Quick Normal or Quick Normal or Quick Normal or Quick n/a Normal or Quick Anti-Crease 1, 2, or 3 hours 1, 2, or 3 hours 1, 2, or 3 hours 1, 2, or 3 hours 1, 2, or 3 hours 1, 2, or 3 hours Buzzer On or Off On or Off On or Off On or Off On or Off On or Off Delay Start 1 to 24 hours 1 to 24 hours 1 to 24 hours 1 to 24 hours 1 to 24 hours 1 to 24 hours NOTES: (1) The Normal cool-down cycle is 15 minutes; the Quick cycle is 5 minutes. (2) The Air fluff and Timed dry programs require you to select a program time. You can select from 5 to 90 minutes, in 5-minute increments. PROGRAMMING INSTRUCTIONS Below are the basic instructions for changing a preset program. The following paragraphs explain the menus and how to navigate through them. You can make temporary (one-time) program changes, or you can make permanent changes. 1. Press the button for the preset program you want to change (P1-P4). The program you select will display in the lower left corner of the LCD window. P1 P2 P3 P4 2. Press MENU until the menu you want to change displays (e.g., Programs, Temperature, etc.). Start Stop 3. Press to scroll through the available options or to toggle between off and on. 4. Press ENTER to save you settings and return to the Main Program screen. The LCD will display your new settings. 5. If you want to use this setting temporarily (for this one load), START. When the program ends it will revert back to the previous setting. 6. If you want to save this setting permanently, press ENTER again then press START. The program will retain the change. See "Navigating the Menus" below for detailed instructions on creating customized programs. NAVIGATING THE MENUS The following paragraphs explain how to navigate through the menus and change the preset programs. If you don't want to make changes in all of the menus, continue to press MENU until the one you do want to change displays. To restore a preset program to the factory default settings, simply press the button for the preset program (P1-P4) you want to restore and hold it down while you press ENTER. The program will revert to the factory default settings. If you change your mind in the process of changing a program, press the Power button to switch the dryer off. When you switch the power back on, the program will be as originally set. Remember, the first step to customizing a preset program is to press the button for the program you want to customize (P1-P4). The Program Menu The Program menu lets you set the dry program you prefer. You would also use this menu to set the machine for a Timed Dry or Air Fluff program. (See "Timed Dry and Air Fluff" on this page.) 1. Press MENU until "Select Program" displays. 2. Press to scroll through the program choices (Extra Dry, Dry, Normal Dry, etc.) 3. When your preference displays, press ENTER. The LCD will display the new program setting. 4. If you only want to use this setting temporarily (for this one load), press START. When the program ends it will revert back to the previous setting. 5. If you want to save this setting permanently, press ENTER again then press START. The program will retain the change. Page 19