Asus A7N8X-VM 400 A7N8X-VM/400 User's Manual - Page 21

Jumpers - cpu

Get Asus A7N8X-VM 400 PDF manuals and user guides View all Asus A7N8X-VM 400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

1.10 Jumpers This section describes and illustrates the jumpers on the motherboard. 1. USB device wake-up (3-pin USBPW12,USBPW34,USBPWR56) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 sleep mode (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). Both jumpers are set to pins 1-2 (+5V) by default because not all computers have the appropriate power supply to support this feature. The USBPW12 jumper is for the rear USB port. USBPW34 and USBPW56 are for the internal USB header that you can connect to front USB ports. This feature requires a power supply that can provide at least 2A on the +5VSB lead when these jumpers are set to +5VSB. Otherwise, the system does not power up. The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. USBPW34 12 23 A7N8X-VM 400 A7N8X-VM 400 USB Device Wake Up +5V (Default) +5VSB USBPW12 12 23 +5V (Default) +5VSB USBPW56 12 23 +5V (Default) +5VSB ASUS A7N8X-VM 400 Motherboard 1-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
ASUS A7N8X-VM 400 Motherboard
1-11
1.10
Jumpers
This section describes and illustrates the jumpers on the motherboard.
1.
USB device wake-up (3-pin USBPW12,USBPW34,USBPWR56)
Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU
stopped, DRAM refreshed, system running in low power mode) using the
connected USB devices. Set to +5VSB to wake up from S3 sleep mode (no
power to CPU, DRAM in slow refresh, power supply in reduced power mode).
Both jumpers are set to pins 1-2 (+5V) by default because not all computers
have the appropriate power supply to support this feature.
The USBPW12 jumper is for the rear USB port. USBPW34 and USBPW56 are
for the internal USB header that you can connect to front USB ports.
This feature requires a power supply that can provide at least 2A on
the +5VSB lead when these jumpers are set to +5VSB. Otherwise, the
system does not power up.
The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal condition or in sleep mode.
A7N8X-VM 400
A7N8X-VM 400 USB Device Wake Up
USBPW34
USBPW12
23
2
1
+5V
(Default)
+5VSB
USBPW56
23
2
1
+5V
(Default)
+5VSB
23
2
1
+5V
(Default)
+5VSB